ALD4201SCL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOIC |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2016 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 135Ohm |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Max Power Dissipation | 600mW |
| Number of Circuits | 4 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 10nA |
| Max Supply Current | 1μA |
| Turn On Delay Time | 240 ns |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Turn-Off Delay Time | 130 ns |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 135Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 3pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 240ns, 130ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 2.7Ohm |
| Crosstalk | -90dB @ 100kHz |
| RoHS Status | ROHS3 Compliant |
ALD4201SCL Overview
As the electronic part is packed in 16-SOIC (0.154, 3.90mm Width), international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tube. Surface Mount is where this multiplexer is located. 1:1 is the ratio of multiplexer to demultiplexer circuits. Extended operating temperature around 0°C~70°C TA. A SPST - NC switching circuit is used to build these analog multiplexers. The multiplexer consists of 4 circuits. Internally, this switch multiplexer has a resistance of 135Ohm. The functions of 16 pins can be found in the datasheets. Multiplexers should not be powered above 12V in normal situations. The lowest voltage the electronic part should receive is 3V. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. There is no problem with using dual supply voltage, but it should not exceed 6V. Temperatures higher than 70°C are not recommended for operation of the analogue multiplexer. Suppliers offer a 16-SOIC package.
ALD4201SCL Features
Switch Circuit: SPST - NC
ALD4201SCL Applications
There are a lot of Advanced Linear Devices Inc. ALD4201SCL Analog Switches & Multiplexers ICs applications.
- Fault Tolerant Systems
- Voice over IP/DSL – Integrated Access Devices, Smart
- Frame Relay Equipment
- MP3 players
- SONET/SDH ADM
- CSU
- E1 Multiplexer
- Automotive applications
- Imaging
- Medical
