banner_page

ALD4202MSCL

240ns, 130ns SPST - NO 135Ohm Analog Switches 100pA 16-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Advanced Linear Devices Inc.
  • Nocochips NO: 16-ALD4202MSCL
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 789
  • Description: 240ns, 130ns SPST - NO 135Ohm Analog Switches 100pA 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Supplier Device Package 16-SOIC
Operating Temperature 0°C~70°C TA
Packaging Tube
Published 2016
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Resistance 135Ohm
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Max Power Dissipation 600mW
Number of Circuits 4
Max Supply Voltage 12V
Min Supply Voltage 3V
Nominal Supply Current 10nA
Max Supply Current 1μA
Turn On Delay Time 110 ns
Voltage - Supply, Single/Dual (±) 3V~12V ±1.5V~6V
Turn-Off Delay Time 180 ns
Max Dual Supply Voltage 6V
On-State Resistance (Max) 135Ohm
Multiplexer/Demultiplexer Circuit 1:1
Current - Leakage (IS(off)) (Max) 100pA
Channel Capacitance (CS(off), CD(off)) 3pF 3pF
Switch Circuit SPST - NO
Switch Time (Ton, Toff) (Max) 240ns, 130ns
Charge Injection 1pC
Channel-to-Channel Matching (ΔRon) 2.7Ohm
Crosstalk -90dB @ 100kHz
RoHS Status ROHS3 Compliant

ALD4202MSCL Overview


The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tube. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a ratio of 1:1. Operating temperature extended to 0°C~70°C TA. Unlike digital switches, these are based on SPST - NO switching circuits. There are 4 circuits in this switch device. In this multiplexer, the internal resistance is 135Ohm. The functions of 16 pins can be found in the datasheets. In a normalsituation, users should not supply the switches with voltage higher than 12V. There should be 3V voltage fed to the electrical part below 3V. When the digital multiplexer is charged above 1μA, damage can occur. Despite this switch device's dual supply capability, its voltage should not exceed 6V. In an environment with a temperature higher than 70°C, the digital switches should not operate. There is a 16-SOIC package offered by suppliers.

ALD4202MSCL Features


Switch Circuit: SPST - NO

ALD4202MSCL Applications


There are a lot of Advanced Linear Devices Inc. ALD4202MSCL Analog Switches & Multiplexers ICs applications.

  • Multi-Line E1 Interface Cards
  • Multiplexers
  • Power routing
  • Frame Relay Equipment
  • Routers
  • DSLAMs
  • Audio and video signal routing
  • Cross Connects
  • Remote Powered Equipment
  • PDAs

Write a review

Note: HTML is not translated!
    Bad           Good