ALD4211SCL

130ns, 130ns SPST - NC 135Ohm Analog Switches 100pA 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Advanced Linear Devices Inc.
Nocochips NO: 16-ALD4211SCL
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 187
Description: 130ns, 130ns SPST - NC 135Ohm Analog Switches 100pA 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Supplier Device Package	16-SOIC
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Resistance	135Ohm
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Max Power Dissipation	600mW
Number of Circuits	4
Max Supply Voltage	12V
Min Supply Voltage	3V
Nominal Supply Current	10nA
Max Supply Current	1μA
Turn On Delay Time	300 ns
Voltage - Supply, Single/Dual (±)	3V~12V ±1.5V~6V
Turn-Off Delay Time	150 ns
Max Dual Supply Voltage	6V
On-State Resistance (Max)	135Ohm
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	3pF 3pF
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	130ns, 130ns
Charge Injection	0.2pC
Channel-to-Channel Matching (ΔRon)	2.7Ohm
Crosstalk	-90dB @ 100kHz
RoHS Status	ROHS3 Compliant

ALD4211SCL Overview

Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tube is used. A switch device like this is mounted in Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Around -40°C~85°C TA is the extended operating temperature. A SPST - NC switching circuit is used to build these analog multiplexers. 4 circuits are used in this analogue multiplexer. A 135Ohm internal resistance characterizes this multiplexer. The functions of 16 pins can be found in the datasheets. Users should never supply a voltage higher than 12V to a switch device. There should be 3V voltage fed to the electrical part below 3V. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 6V. A temperature above 85°C is not suitable for operation of the analogue multiplexer. Suppliers offer a package with 16-SOIC.