ALD4212PCL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Supplier Device Package | 16-PDIP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 135Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 600mW |
| Number of Circuits | 4 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 10nA |
| Max Supply Current | 1μA |
| Turn On Delay Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Turn-Off Delay Time | 1.5 μs |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 135Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 3pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 130ns, 130ns |
| Charge Injection | 0.2pC |
| Channel-to-Channel Matching (ΔRon) | 2.7Ohm |
| Crosstalk | -90dB @ 100kHz |
| RoHS Status | ROHS3 Compliant |
ALD4212PCL Overview
Packed in 16-DIP (0.300, 7.62mm), the electronic component is convenient for shipping overseas. High reliability is provided by advanced packaging method Tube. Through Hole is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 1:1. Increasing operating temperature to around -40°C~85°C TA. Circuits based on SPST - NO switching are used to construct these analog switch ics. The multiplexer consists of 4 circuits. This digital multiplexer has 135Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. Users shouldn't supply more than 12V voltage to the switch device. The lowest voltage fed to the electronic component should be 3V. A digital multiplexer may suffer damage if voltage is applied above 1μA. If put voltage greater than 6V on the multiplexer, damage may be caused to the device. It is not recommended to operate the switches in an environment with a temperature higher than 85°C. It is possible to purchase a 16-PDIP package from suppliers.
ALD4212PCL Features
Switch Circuit: SPST - NO
ALD4212PCL Applications
There are a lot of Advanced Linear Devices Inc. ALD4212PCL Analog Switches & Multiplexers ICs applications.
- Sample hold systems
- Power routing
- Sample-and-hold systems
- Remote wireless modules
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Cellular phones
- Public switching systems
- SONET
- New designs requiring multiplexer functions
- Cell phones
