ALD4212SCL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2016 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 135Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 600mW |
| Number of Circuits | 4 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 10nA |
| Max Supply Current | 1μA |
| Turn On Delay Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Turn-Off Delay Time | 150 ns |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 135Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 3pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 130ns, 130ns |
| Charge Injection | 0.2pC |
| Channel-to-Channel Matching (ΔRon) | 2.7Ohm |
| Crosstalk | -90dB @ 100kHz |
| RoHS Status | ROHS3 Compliant |
ALD4212SCL Overview
The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. This packaging method provides high reliability because it uses advanced packaging techniques. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. The operating temperature is extended to around -40°C~85°C TA. Unlike digital switches, these are based on SPST - NO switching circuits. A total of 4 circuits make up this switch device. In this multiplexer, the internal resistance is 135Ohm. You can find the functions of the 16 pins in the datasheets. It is generally not recommended to supply a voltage higher than 12V to the switch device in normal circumstances. In order for the electronic part to function properly, the lowest voltage should be 3V. Putting voltage greater than 1μA on the multiplexer may cause damage. For this multiplexer, dual supply voltage is feasible, but it should not exceed 6V. Temperatures above 85°C should not be used to operate the switches. It is offered by suppliers in package 16-SOIC.
ALD4212SCL Features
Switch Circuit: SPST - NO
ALD4212SCL Applications
There are a lot of Advanced Linear Devices Inc. ALD4212SCL Analog Switches & Multiplexers ICs applications.
- Microprocessor controlled systems
- Relay Replacement
- 65 V DACs
- Optical Applications
- Medical systems
- Isolation
- Fault Tolerant Systems
- Transmit
- Industrial and process control systems
- PDH Multiplexers
