Parameters |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
14-DIP (0.300, 7.62mm) |
Number of Pins |
14 |
Supplier Device Package |
14-PDIP |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Published |
2005 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Type |
General Purpose |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Max Power Dissipation |
600mW |
Output Type |
CMOS, NMOS, Open-Drain, TTL |
Number of Elements |
4 |
Number of Channels |
4 |
Max Supply Voltage |
12V |
Min Supply Voltage |
3V |
Nominal Supply Current |
350μA |
Output Current |
60mA |
Max Supply Current |
350μA |
Quiescent Current |
350μA |
Response Time |
650 ns |
Voltage - Supply, Single/Dual (±) |
3V~10V ±1.5V~5V |
Output Current per Channel |
60mA |
Input Offset Voltage (Vos) |
10mV |
Voltage Gain |
103.52dB |
Max Input Current |
30pA |
Input Bias Current |
30pA |
Current - Quiescent (Max) |
350μA |
Voltage - Input Offset (Max) |
10mV @ 5V |
Current - Input Bias (Max) |
30pA @ 5V |
Current - Output (Typ) |
60mA @ 5V |
RoHS Status |
ROHS3 Compliant |
ALD4301PBL Overview
In order to facilitate transportation, it is packaged in 14-DIP (0.300, 7.62mm) .A comparator with an output type of CMOS, NMOS, Open-Drain, TTL is being used.As a result, it is designed with Tube package.In terms of type, this is a typical General Purpose comparator.This is a 4 element comparator.Electronic comparator is recommended to mount using type Through Hole .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C in order to prevent malfunctions.The comparator consists of 14 pins.There is a quiescent current of 350μA in this comparator.A Through Hole is provided for mounting it onto a PCB or another board.Electronic comparator is recommended that the nominal supply current for the device be set to 350μA .The compartator could be damaged if the current supply exceeds 350μA .You can input a maximum current of 30pA into this device.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 103.52dB .Comparator electronics is not recommended to operate at a temperature higher than 70°C .Comparator electronics cannot be operated at temperatures below 0°C .Compatibility is defined as 12V when the comparator is operating at its maximum supply voltage.There is a minimum supply voltage of 3V for this comparator.4 channels cooperate together to maintain the output quality.
ALD4301PBL Features
CMOS, NMOS, Open-Drain, TTL output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 350μA
Voltage Gain: 103.52dB
ALD4301PBL Applications
There are a lot of Advanced Linear Devices Inc. ALD4301PBL linear comparators applications.
- Wearable Devices
- RC Timers
- Mobile Communications
- System control and monitoring
- Set Top Boxes
- Multivibrators and High-Voltage Digital Logic Gates
- Appliances
- Portable and Battery-Powered Systems
- High-Speed Differential Line Receiver
- Laptop Computers