ALD4302ASBL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Supplier Device Package | 14-SOIC |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2005 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | General Purpose |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Max Power Dissipation | 600mW |
| Output Type | CMOS, NMOS, Push-Pull, TTL |
| Number of Elements | 4 |
| Number of Channels | 4 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1.5V |
| Nominal Supply Current | 1mA |
| Output Current | 60mA |
| Max Supply Current | 1mA |
| Quiescent Current | 1mA |
| Response Time | 400 ns |
| Voltage - Supply, Single/Dual (±) | 4V~10V ±2V~5V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 5mV |
| Max Input Current | 1nA |
| Input Bias Current | 200pA |
| Current - Quiescent (Max) | 1mA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.001μA @ 5V |
| Current - Output (Typ) | 60mA |
| RoHS Status | ROHS3 Compliant |
ALD4302ASBL Overview
A convenient transport package is provided in 14-SOIC (0.154, 3.90mm Width) .A comparator with a CMOS, NMOS, Push-Pull, TTL output is used here.As a result, it is designed with Tube package.The type of the chip can be classified as General Purpose .This is a 4 element comparator.Electronic comparator is recommended to mount using type Surface Mount .As a precaution, it is recommended to set the operating temperature to 0°C~70°C to prevent malfunctions.There are 14 pins on the comparator.This comparator presents a quiescent current of 1mA .There is a Surface Mount for mounting it on a PCB or other board.Normal use of the device should require a nominal supply current of 1mA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 1mA .You are allowed to input a maximum current of 1nA into the device.An increase in temperature over 70°C is not recommended.Temperatures below 0°C are not suitable for the device.6V is the maximum supply voltage of the comparator.A minimum supply voltage of 1.5V is permitted for this comparator.In order to maintain the quality of the output, 4 channels cooperate together.
ALD4302ASBL Features
CMOS, NMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 1mA
ALD4302ASBL Applications
There are a lot of Advanced Linear Devices Inc. ALD4302ASBL linear comparators applications.
- Power management
- Metering Systems
- High-Speed Differential Line Receiver
- Pulse, Squarewave, and Time Delay Generators
- Factory automation & control
- Security Detection Systems
- General-Purpose, Low-Voltage Applications
- Wide Range VCO; MOS Clock Timers
- Handheld Instruments
- Self-diagnostics
