ALD4302PBL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Supplier Device Package | 14-PDIP |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2005 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | General Purpose |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Max Power Dissipation | 600mW |
| Output Type | CMOS, NMOS, Push-Pull, TTL |
| Number of Elements | 4 |
| Number of Channels | 4 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1.5V |
| Nominal Supply Current | 1mA |
| Output Current | 60mA |
| Max Supply Current | 1mA |
| Quiescent Current | 1mA |
| Response Time | 400 ns |
| Voltage - Supply, Single/Dual (±) | 4V~10V ±2V~5V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 10mV |
| Input Bias Current | 1nA |
| Current - Quiescent (Max) | 1mA |
| Voltage - Input Offset (Max) | 10mV @ 5V |
| Current - Input Bias (Max) | 0.001μA @ 5V |
| Current - Output (Typ) | 60mA |
| RoHS Status | ROHS3 Compliant |
ALD4302PBL Overview
In order to facilitate transportation, it is packaged in 14-DIP (0.300, 7.62mm) .There is a comparator of type CMOS, NMOS, Push-Pull, TTL output on this device.We ship the part through Tube .Speaking of types, this is a typical General Purpose comparator.There are a total of 4 elements in it.Electronic comparator is recommended that the mounting type be Through Hole .Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.There are 14 pins on the comparator.The comparator displays a quiescent current of 1mA .A Through Hole is provided for mounting on PCBs or other boards.Normal operation of the device requires 1mA supply current.A current supply greater than 1mA may cause the comparator to malfunction.An increase in temperature over 70°C is not recommended.Comparator electronics cannot be used at a temperature below 0°C .The comparator has a maximum supply voltage of 6V .The comparator is capable of operating at a minimum supply voltage of 1.5V .For the output quality to be maintained, 4 channels work together.
ALD4302PBL Features
CMOS, NMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 1mA
ALD4302PBL Applications
There are a lot of Advanced Linear Devices Inc. ALD4302PBL linear comparators applications.
- Self-diagnostics
- High-Speed Differential Line Receiver
- Automatic Test Equipment
- General-Purpose, Low-Voltage Applications
- Mobile Phones
- Infotainment & cluster
- Portable Battery Monitoring
- Window Comparators
- Motor drives
- Appliances
