banner_page

ALD4302SBL

Surface Mount Tube 60mA mA 400 ns μs Linear Comparators 200pA pA 2005 1mA μA 10mV mV Surface Mount


  • Manufacturer: Advanced Linear Devices Inc.
  • Nocochips NO: 16-ALD4302SBL
  • Package: 14-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 461
  • Description: Surface Mount Tube 60mA mA 400 ns μs Linear Comparators 200pA pA 2005 1mA μA 10mV mV Surface Mount (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 14-SOIC (0.154, 3.90mm Width)
Number of Pins 14
Supplier Device Package 14-SOIC
Operating Temperature 0°C~70°C
Packaging Tube
Published 2005
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Type General Purpose
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Max Power Dissipation 600mW
Output Type CMOS, NMOS, Push-Pull, TTL
Number of Elements 4
Number of Channels 4
Max Supply Voltage 6V
Min Supply Voltage 1.5V
Nominal Supply Current 1mA
Output Current 60mA
Max Supply Current 1mA
Quiescent Current 1mA
Response Time 400 ns
Voltage - Supply, Single/Dual (±) 4V~10V ±2V~5V
Output Current per Channel 60mA
Input Offset Voltage (Vos) 10mV
Max Input Current 1nA
Input Bias Current 200pA
Current - Quiescent (Max) 1mA
Voltage - Input Offset (Max) 10mV @ 5V
Current - Input Bias (Max) 0.001μA @ 5V
Current - Output (Typ) 60mA
RoHS Status ROHS3 Compliant

ALD4302SBL Overview


The product is packaged in 14-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.Output type CMOS, NMOS, Push-Pull, TTL is used for this comparator.The part is shipped by Tube .In terms of type, this is a typical General Purpose comparator.Electronic comparator consists of 4 elements in total.In general, mounting type Surface Mount is recommended.As a precaution, it is recommended to set the operating temperature to 0°C~70°C to prevent malfunctions.The comparator has a pin count of 14 .A quiescent current of 1mA is observed in this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .For normal use of the device, the nominal supply current should be 1mA .A current supply greater than 1mA may cause the comparator to malfunction.Electronic comparator is possible to input a maximum of 1nA current into the device.Temperature higher than 70°C is not recommended.Comparator electronics cannot be used at a temperature below 0°C .Compatibility is defined as 6V when the comparator is operating at its maximum supply voltage.A minimum supply voltage of 1.5V is allowed for this comparator.As a result, 4 channels work together to maintain the quality of the output.

ALD4302SBL Features


CMOS, NMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 1mA

ALD4302SBL Applications


There are a lot of Advanced Linear Devices Inc. ALD4302SBL linear comparators applications.

  • Window Comparators
  • Battery-Powered Electronics
  • Analog front end
  • Automotive
  • Handheld Instruments
  • Ultra-Low Power Systems
  • Mobile Phones and Tablets
  • Simple Analog-to-Digital Converters (ADCs)
  • Set Top Boxes
  • Portable Battery Monitoring

Write a review

Note: HTML is not translated!
    Bad           Good