ALD555SAL

555 Type, Timer/Oscillator (Single) Programmable Timers 2MHz 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Advanced Linear Devices Inc.
Nocochips NO: 16-ALD555SAL
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 237
Description: 555 Type, Timer/Oscillator (Single) Programmable Timers 2MHz 8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Supplier Device Package	8-SOIC
Operating Temperature	0°C~70°C
Packaging	Tube
Published	2005
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Type	555 Type, Timer/Oscillator (Single)
Max Operating Temperature	70°C
Min Operating Temperature	0°C
Max Power Dissipation	600mW
Voltage - Supply	2V~12V
Frequency	2MHz
Max Supply Voltage	12V
Min Supply Voltage	2V
Operating Supply Current	100μA
Nominal Supply Current	100μA
Current - Supply	100μA
Number of Timers/Counters	1
Height	1.75mm
RoHS Status	ROHS3 Compliant

ALD555SAL Overview

There is a 8-SOIC (0.154, 3.90mm Width) enclosure with the programmable timer. Ensure that the programmable timer's frequency is set to 2MHz.It is used to pack in Tube case. The recommended mounting type is Surface Mount.When a programmable timer is configured to operate at 2V~12V volts, the voltage that is supplied can be 2V~12V.The type of chips can be divided into 555 Type, Timer/Oscillator (Single). The operating temperature of this timer clock is 0°C~70°C. To mount this digital timer with Surface Mount. To keep the clock timer's supply current at 100μA. The operating supply voltage is rated at 100μA voltage. The minimum operating temperature of the chip must not be lower than 0°C. It's best to use the timer clock when the temperature is below 70°C. The timer clock contains 8 pins. The minimum supply voltage of the chip must not be lower than 2V. The supply voltage of this chip should not exceed 12V. The number of Timers/Counters on the device is 1.