Parameters |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Number of Pins |
8 |
Supplier Device Package |
8-PDIP |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Published |
2010 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Type |
555 Type, Timer/Oscillator (Single) |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Max Power Dissipation |
600mW |
Voltage - Supply |
2V~10V |
Frequency |
2.5MHz |
Max Supply Voltage |
10V |
Min Supply Voltage |
2V |
Operating Supply Current |
50μA |
Current - Supply |
50μA |
Number of Timers/Counters |
1 |
RoHS Status |
ROHS3 Compliant |
ALD7555PAL Overview
There is a 8-DIP (0.300, 7.62mm) that comes with the timer clock, which is enclosed in the packaging. Set the programmable timer's frequency to 2.5MHz.It is used to pack in Tube case. There is a recommended mounting type of Through Hole.There is a voltage of 2V~10V that can be supplied by the programmable timer.The type of chips can be divided into 555 Type, Timer/Oscillator (Single). The operating temperature of this timer clock is 0°C~70°C. To mount this digital timer with Through Hole. To keep the clock timer's supply current at 50μA. The operating supply voltage is rated at 50μA voltage. The minimum operating temperature of the chip must not be lower than 0°C. It's best to use the timer clock when the temperature is below 70°C. The timer clock contains 8 pins. The minimum supply voltage of the chip must not be lower than 2V. The supply voltage of this chip should not exceed 10V. The number of Timers/Counters on the device is 1.
ALD7555PAL Features
Operate frequency at 2.5MHz
Package / Case: Tube
Mounting Type:Through Hole
Current - Supply:50μA
Max Operating temperature at 0°C
1 Timers/Counters
ALD7555PAL Applications
There are a lot of Advanced Linear Devices Inc. ALD7555PAL Programmable Timers & Oscillators applications.
- High Vibration, High Acceleration Environments
- Battery Powered Systems
- Internet of Things (IoT)
- Intruder Detection
- Sensor Node
- Remote current sensor
- Battery-Powered Systems
- Tamper Detection
- Smart Key
- Home Automation Sensors