AM1705BPTP3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | 176-LQFP Exposed Pad |
| Number of Pins | 176 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tube |
| Series | Sitara™ |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 176 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Frequency | 375MHz |
| Base Part Number | AM1705 |
| Pin Count | 176 |
| Operating Supply Voltage | 1.2V |
| Voltage | 1.32V |
| Max Supply Voltage | 1.32V |
| Min Supply Voltage | 1.14V |
| Memory Size | 16kB |
| RAM Size | 8kB |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM926EJ-S |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 1 |
| Address Bus Width | 13 |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 3.3V |
| Number of UART Channels | 3 |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | SDRAM |
| USB | USB 2.0 + PHY (1) |
| Additional Interfaces | I2C, McASP, SPI, MMC/SD, UART |
| Co-Processors/DSP | System Control; CP15 |
| Length | 24mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AM1705BPTP3 Overview
Due to its 176-LQFP Exposed Pad packaging, it is convenient to ship overseas. The packaging method Tube provides high reliability. This CPU has 1 Core 32-Bit cores and 1 Core 32-Bit bus widths. The operating temperature around 0°C~90°C TJ should be understood. A Sitara? series item. This CPU is cored with a ARM926EJ-S processor. There are SDRAM RAM controllers on this CPU. This microprocessor is equipped with an interface of I2C, McASP, SPI, MMC/SD, UART. 1.8V 3.3V is the CPU's I/O address. This is a MICROPROCESSOR, RISC for the uPs/uCs/Peripheral ICs type. AM1705 is a good way to search for variants of the microprocessor. In total, 176 terminations have been made. The microprocessor should be turned on and run with a voltage supply of 1.2V volts. It is an architecture with 32 bits. 375MHz is the CPU's frequency. 176 pin functions are described in the datasheets. A typical Microprocessors embedded microprocessor. It is important to note that there is 16b bandwidth available for data transfer. There are 176 pins injected into the embedded microprocessor body. With the Surface Mount mounted, this CPU is widely used in a wide range of applications. From 1.2V on, the CPU microprocessor will function. 1.32V is the voltage on the CPU core. Random-Access Memory (RAM) is designed with an amount of 8kB KB. Users should not supply a microprocessor with more voltage than 1.32V under normalcircumstances. A voltage of 1.14V is recommended for feeding the embedded microprocessor. There is 16kB memory on the CPU. The 1 counters help determine how busy the CPU is. A total of 3 UART (Universal Asynchro3us Receiver/Transmitter) channels are available on this embedded microprocessor
AM1705BPTP3 Features
ARM926EJ-S Core
32-Bit Structure
16b-Bit Data Bus Width
8kB RAM
AM1705BPTP3 Applications
There are a lot of Texas Instruments AM1705BPTP3 Microprocessor applications.
- Answering machines
- Electronic jamming systems
- Equipment control
- Printers
- Guidance-GPS
- Nintendo
- Gas monitoring systems
- Network application field
- Mice
- Playstation
