Parameters |
Mount |
Surface Mount |
Package / Case |
176-LQFP Exposed Pad |
Number of Pins |
176 |
Operating Temperature |
-40°C~105°C TJ |
Packaging |
Tray |
Series |
Sitara™ |
JESD-609 Code |
e4 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
4 (72 Hours) |
Number of Terminations |
176 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Microprocessors |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
1.2V |
Terminal Pitch |
0.5mm |
Frequency |
375MHz |
Base Part Number |
AM1705 |
Pin Count |
176 |
Operating Supply Voltage |
1.2V |
Voltage |
1.32V |
Max Supply Voltage |
1.32V |
Min Supply Voltage |
1.14V |
Memory Size |
16kB |
RAM Size |
8kB |
uPs/uCs/Peripheral ICs Type |
MICROPROCESSOR, RISC |
Core Processor |
ARM926EJ-S |
Bit Size |
32 |
Data Bus Width |
16b |
Number of Timers/Counters |
1 |
Address Bus Width |
13 |
Core Architecture |
ARM |
Boundary Scan |
YES |
Low Power Mode |
YES |
Format |
FIXED POINT |
Integrated Cache |
YES |
Voltage - I/O |
1.8V 3.3V |
Number of UART Channels |
3 |
Ethernet |
10/100Mbps (1) |
Number of Cores/Bus Width |
1 Core 32-Bit |
Graphics Acceleration |
No |
RAM Controllers |
SDRAM |
USB |
USB 2.0 + PHY (1) |
Additional Interfaces |
I2C, McASP, SPI, MMC/SD, UART |
Co-Processors/DSP |
System Control; CP15 |
Length |
24mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
AM1705BPTPA3 Overview
The microprocessor is conveniently packaged in 176-LQFP Exposed Pad, making it easy to ship internationally. In order to provide high reliability, advanced packaging method Tray is used. In the CPU, there are 1 Core 32-Bit cores and 1 Core 32-Bit bus width. Understand the operating temperature around -40°C~105°C TJ. In the series Sitara?, it is found. ARM926EJ-S is the processor core of this CPU. There are SDRAM RAM controllers used by this CPU. This microprocessor features I2C, McASP, SPI, MMC/SD, UART interfaces to better serve its users. 1.8V 3.3V is the CPU's I/O address. A MICROPROCESSOR, RISC represents the uPs/uCs/Peripheral ICs type. Try searching for variants of the cpu microprocessor with AM1705. A total of 176 terminations have been recorded. A 1.2V voltage supply should be used to turn on and run the cpu microprocessor. In terms of architecture, it is a 32-Bit system. At 375MHz, the CPU operates. To learn about the functions of the pins 176 please refer to their datasheets. A typical Microprocessors embedded microprocessor. Data can be transferred over 16b bandwidths. An injection of 176 pins is performed inside the body of the micro processor. This CPU is widely used in many applications because of its Surface Mount mount. From 1.2V, the micro processor can be used. A CPU core voltage of 1.32V is present. A 8kB amount of RAM (Random-Access Memory) is designed. Microprocessors should never be supplied with voltages above 1.32V in normalcircumstances. It is recommended that the lowest voltage be fed to the micro processor is 1.14V. Its memory size is 16kB. The CPU's idle time can be determined by 1 counters. With this CPU microprocessor, you get 3 UART (Universal Asynchro3us Receiver/Transmitter) channels.
AM1705BPTPA3 Features
ARM926EJ-S Core
32-Bit Structure
16b-Bit Data Bus Width
8kB RAM
AM1705BPTPA3 Applications
There are a lot of Texas Instruments AM1705BPTPA3 Microprocessor applications.
- Toasters
- Answering machines
- Electromechanical control
- Toys
- Consumer electronics products
- Radio
- Fax machines
- Oil and gas
- Set-top boxes
- Auto-breaking system