AM1705CPTP3
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | 176-LQFP Exposed Pad |
| Number of Pins | 176 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Series | Sitara™ |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 176 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Frequency | 375MHz |
| Base Part Number | AM1705 |
| Operating Supply Voltage | 1.2V |
| Voltage | 1.32V |
| Interface | SPI, USB |
| Max Supply Voltage | 1.32V |
| Min Supply Voltage | 1.14V |
| Memory Size | 16kB |
| RAM Size | 8kB |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM926EJ-S |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Address Bus Width | 13 |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 3.3V |
| Number of UART Channels | 3 |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | SDRAM |
| USB | USB 2.0 + PHY (1) |
| Additional Interfaces | I2C, McASP, SPI, MMC/SD, UART |
| Co-Processors/DSP | System Control; CP15 |
| Height Seated (Max) | 1.6mm |
| Length | 24mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AM1705CPTP3 Overview
The embedded microprocessor has been packed in 176-LQFP Exposed Pad for convenient overseas shipping. High reliability is provided by the advanced packaging method Tray. In the CPU, there are 1 Core 32-Bit cores and 1 Core 32-Bit bus width. Understand how the operating temperature around 0°C~90°C TJ is determined. From the Sitara? series. A ARM926EJ-S processor powers this CPU. A total of SDRAM RAM controllers are used by this CPU. Featuring I2C, McASP, SPI, MMC/SD, UART interfaces, this microprocessor can better serve you. The CPU runs at 1.8V 3.3V when it comes to I/O. The type MICROPROCESSOR, RISC belongs to uPs/uCs/Peripheral ICs. To find variants of the microprocessor, try searching with AM1705. To date, there have been 176 terminations. The microprocessor should be turned on and run with a voltage supply of 1.2V volts. It has a 32-Bit architecture. A CPU operates at a frequency of 375MHz. To learn about the functions of the pins 176 please refer to their datasheets. The cpu microprocessor Microprocessors is typical. Data transfer has 32b bandwidths. Surface Mount mounted, this CPU is widely used in many applications. As of 1.2V, the CPU microprocessor is capable of functioning. There is 1.32V voltage at the CPU core. A 8kB amount of RAM (Random-Access Memory) is designed. A voltage greater than 1.32V should not normally be applied to the embedded microprocessor. A voltage of 1.14V is recommended for feeding the embedded microprocessor. A CPU is equipped with a 16kB sized memory. 3 UART (Universal Asynchro3us Receiver/Transmitter) channels are provided with this CPU microprocessor
AM1705CPTP3 Features
ARM926EJ-S Core
32-Bit Structure
32b-Bit Data Bus Width
8kB RAM
AM1705CPTP3 Applications
There are a lot of Texas Instruments AM1705CPTP3 Microprocessor applications.
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Blenders
- Industrial instrumentation devices
- Day to day life field
- Digital cameras
- Network communication, mobile communication field
- Oil and gas
- Heater/Fan
- Fire alarms
- Volt meter
