AM1705CPTPA3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | 176-LQFP Exposed Pad |
| Number of Pins | 176 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tube |
| Series | Sitara™ |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 176 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Frequency | 375MHz |
| Base Part Number | AM1705 |
| Voltage | 1.32V |
| Interface | SPI, USB |
| Max Supply Voltage | 1.32V |
| Min Supply Voltage | 1.14V |
| Memory Size | 16kB |
| RAM Size | 8kB |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM926EJ-S |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Address Bus Width | 13 |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 3.3V |
| Number of UART Channels | 3 |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | SDRAM |
| USB | USB 2.0 + PHY (1) |
| Additional Interfaces | I2C, McASP, SPI, MMC/SD, UART |
| Co-Processors/DSP | System Control; CP15 |
| Height Seated (Max) | 1.6mm |
| Length | 24mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AM1705CPTPA3 Overview
With a packing size of 176-LQFP Exposed Pad, this embedded microprocessor is ideal for international shipping. Advanced packaging method Tube is used to provide high reliability. CPUs have 1 Core 32-Bit cores/bus width. Identify the operating temperature around -40°C~105°C TJ. In the Sitara? series, it is found. A ARM926EJ-S processor powers this CPU. SDRAM RAM controllers are used by this CPU. This microprocessor features interfaces I2C, McASP, SPI, MMC/SD, UART. This CPU runs I/O at 1.8V 3.3V. uPs/uCs/Peripheral ICs are a MICROPROCESSOR, RISC. If you are looking for variants of the cpu microprocessor, try search with AM1705. Total terminations are 176. A 1.2V voltage supply should be used to turn on and run the cpu microprocessor. An architecture based on 32 bits is used. At 375MHz, the CPU operates. For functions of 176 pins, please refer to the datasheets. As a typical Microprocessors, this cpu microprocessor has Microprocessors display. It is important to note that there is 32b bandwidth available for data transfer. There are many applications that use the CPU with Surface Mount mounted. The CPU core voltage is 1.32V. There is 8kB RAM (Random Access Memory) built in. It is generally recommended that users do not supply their embedded microprocessors with voltages higher than 1.32V. Micro processors should be supplied with 1.14V as their lowest voltage. 16kB bytes of memory are allocated to the CPU. There are 3 UART (Universal Asynchro3us Receiver/Transmitter) channels on this embedded microprocessor
AM1705CPTPA3 Features
ARM926EJ-S Core
32-Bit Structure
32b-Bit Data Bus Width
8kB RAM
AM1705CPTPA3 Applications
There are a lot of Texas Instruments AM1705CPTPA3 Microprocessor applications.
- Tape drives
- Ipad
- Office automation equipment and computer peripherals
- Light sensing & controlling devices
- Fax machines
- Projectors
- Christmas lights
- Smartphone
- Current meter
- Aerospace navigation systems
