AM1707BZKB3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | 256-BGA |
| Number of Pins | 256 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Series | Sitara™ |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Frequency | 375MHz |
| Base Part Number | AM1707 |
| Pin Count | 256 |
| Operating Supply Voltage | 1.2V |
| Voltage | 1.32V |
| Interface | I2C, SPI, UART |
| Max Supply Voltage | 1.32V |
| Min Supply Voltage | 1.14V |
| Memory Size | 16kB |
| RAM Size | 8kB |
| Core Processor | ARM926EJ-S |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Address Bus Width | 16 |
| Core Architecture | RISC |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 3.3V |
| Number of UART Channels | 3 |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | SDRAM |
| USB | USB 1.1 + PHY (1), USB 2.0 + PHY (1) |
| Additional Interfaces | I2C, McASP, SPI, MMC/SD, UART |
| Co-Processors/DSP | System Control; CP15 |
| Display & Interface Controllers | LCD |
| Height Seated (Max) | 2.05mm |
| Length | 17mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AM1707BZKB3 Overview
Due to its 256-BGA packaging, it is convenient to ship overseas. Using advanced packaging techniques Tray, high reliability is ensured. A CPU with 1 Core 32-Bit cores and width 1 Core 32-Bit busses is used. Recognize operating temperatures around 0°C~90°C TJ. A Sitara? series item. With a core count of ARM926EJ-S, this CPU is multicore. There are SDRAM RAM controllers used by this CPU. The microprocessor features interfaces I2C, McASP, SPI, MMC/SD, UART for better service. The CPU runs I/O at 1.8V 3.3V. Use AM1707 when searching for variants of the embedded microprocessor. Total terminations are 256. You should be able to turn on and run the embedded microprocessor with a voltage supply of 1.2V. There are 32 bits in its architecture. CPUs operate with a frequency of 375MHz Hz. You can refer to the datasheets for the functions of 256 pins. This microprocessor is a typical Microprocessors. The bandwidth required to transfer data is 32b. Micro processor body consists of 256 pins. This CPU is widely used in a variety of applications with its Surface Mount mounting. From 1.2V on, the CPU microprocessor will function. A CPU core voltage of 1.32V is present. In this case, the amount of RAM (Random-Access Memory) is set to 8kB. Microprocessors should never be supplied with voltages above 1.32V in normalcircumstances. In order for the micro processor to work at its best, it should be fed a voltage of 1.14V. A CPU has a memory size of 16kB bytes. 3 UART (Universal Asynchro3us Receiver/Transmitter) channels are provided by this CPU microprocessor
AM1707BZKB3 Features
ARM926EJ-S Core
32-Bit Structure
32b-Bit Data Bus Width
8kB RAM
AM1707BZKB3 Applications
There are a lot of Texas Instruments AM1707BZKB3 Microprocessor applications.
- Smoke alarms
- Torpedo guidance
- Graphic terminals
- Home appliances
- Answering machines
- Scanners
- Paper shredders
- Speed meter
- Heater/Fan
- Nintendo
