AM1707DZKB4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Package / Case | 256-BGA |
| Number of Pins | 256 |
| Weight | 2.784008g |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Series | Sitara™ |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Frequency | 456MHz |
| Base Part Number | AM1707 |
| Operating Supply Voltage | 1.3V |
| Interface | Ethernet, I2C, SPI, UART, USB |
| Max Supply Voltage | 1.35V |
| Min Supply Voltage | 1.25V |
| RAM Size | 128kB |
| Memory Type | L1 Cache, RAM, ROM |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM926EJ-S |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 3.3V |
| Number of UART Channels | 3 |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | SDRAM |
| USB | USB 1.1 + PHY (1), USB 2.0 + PHY (1) |
| Additional Interfaces | I2C, McASP, SPI, MMC/SD, UART |
| Co-Processors/DSP | System Control; CP15 |
| Number of Cores | 1 |
| Display & Interface Controllers | LCD |
| Height | 2.05mm |
| Length | 17mm |
| Width | 17mm |
| Thickness | 1.36mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AM1707DZKB4 Overview
Shipping overseas is convenient since the embedded microprocessor is packed in 256-BGA. The packaging method Tray provides high reliability. 1 Core 32-Bit cores/Bus width are present in the CPU. Understand how the operating temperature around 0°C~90°C TJ is determined. Sitara? is its series number. The CPU is cored by a processor with a number of 0 cores. A CPU with this architecture uses SDRAM RAM controllers. This microprocessor features interfaces I2C, McASP, SPI, MMC/SD, UART. 1.8V 3.3V is the I/O speed of this CPU. I would rate this as a MICROPROCESSOR, RISC for the uPs/uCs/Peripheral ICs type. Use AM1707 when searching for variants of the embedded microprocessor. In total, there are 256 terminations. In the case of a 1.2V voltage supply, the embedded microprocessor should be turned on and run. The architecture of the microprocessor is 32-bit. The CPU operates at a frequency of 456MHz. For information about 256 pins, please refer to the datasheet. The cpu microprocessor Microprocessors is typical. The bandwidth required to transfer data is 32b. A 1-core CPU is used here. There are many applications that use the CPU with Surface Mount mounted. The micro processor can function from 1.3V. The amount of RAM (Random-Access Memory) is designed 128kB. normally, the microprocessor should not receive a voltage higher than 1.35V. The lowest voltage that should be applied to the micro processor is 1.25V. This embedded microprocessor is equipped with 3 UART (Universal Asynchro3us Receiver/Transmitter) channels
AM1707DZKB4 Features
ARM926EJ-S Core
32-Bit Structure
32b-Bit Data Bus Width
1-Core CPU
128kB RAM
AM1707DZKB4 Applications
There are a lot of Texas Instruments AM1707DZKB4 Microprocessor applications.
- Communication-bluetooth, Wi-Fi, radio
- Smart highways (navigation, traffic control, information monitoring and car service)
- Answering machines
- Oil and gas
- Nintendo
- Calculator
- Auto-breaking system
- X-ray
- Instrument control
- Mice
