AM1802BZWTD3
| Parameters | |
|---|---|
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Package / Case | 361-LFBGA |
| Number of Pins | 361 |
| Operating Temperature | -40°C~90°C TJ |
| Packaging | Tray |
| Series | Sitara™ |
| JESD-609 Code | e1 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 361 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.8mm |
| Frequency | 300MHz |
| Base Part Number | AM1802 |
| Pin Count | 361 |
| Voltage | 1.32V |
| Max Supply Voltage | 1.2V |
| Min Supply Voltage | 950mV |
| Memory Size | 16kB |
| Number of I/O | 144 |
| RAM Size | 8kB |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM926EJ-S |
| Bit Size | 32 |
| Has ADC | NO |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| Core Architecture | ARM |
| Voltage - I/O | 1.8V 3.3V |
| Number of UART Channels | 3 |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | LPDDR, DDR2 |
| USB | USB 2.0 + PHY (1) |
| Additional Interfaces | I2C, McASP, SPI, MMC/SD, UART |
| Co-Processors/DSP | System Control; CP15 |
| ROM Programmability | FLASH |
| Number of Cores | 1 |
| Display & Interface Controllers | LCD |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AM1802BZWTD3 Overview
Shipping overseas is convenient since the embedded microprocessor is packed in 361-LFBGA. The packaging method Tray provides high reliability. There are 1 Core 32-Bit cores per bus width on the CPU. Be aware of the operating temperature around -40°C~90°C TJ. Sitara? is its series number. ARM926EJ-S processors are embedded in this CPU. A CPU with this architecture uses LPDDR, DDR2 RAM controllers. This microprocessor features I2C, McASP, SPI, MMC/SD, UART interfaces to better serve its users. In this CPU, I/O is set to 1.8V 3.3V. A MICROCONTROLLER, RISC represents the uPs/uCs/Peripheral ICs type. Try searching for variants of the cpu microprocessor with AM1802. In total, 361 terminations have been made. In the case of a 1.2V voltage supply, the embedded microprocessor should be turned on and run. It has a 32-Bit architecture. CPUs operate with a frequency of 300MHz Hz. The datasheets for 361 pins provide details. Microprocessors is a typical embedded microprocessor. To transfer data, there are 32b bandwidths available. Micro processor body consists of 361 pins. 1 cores are present in this processor. There are many applications for this CPU, since it is Surface Mount mounted. Currently, the CPU core voltage is 1.32V. RAM (Random Access Memory) is designed to be 8kB. In a normal situation, users should not supply the CPU microprocessor with a voltage higher than 1.2V. It is recommended that the lowest voltage be fed to the micro processor is 950mV. A CPU program transfers data by using 144 I/Os. Memory size on the CPU is 16kB. Counters 4 indicate how busy the CPU is. 3 UART (Universal Asynchro3us Receiver/Transmitter) channels are provided by this CPU microprocessor
AM1802BZWTD3 Features
ARM926EJ-S Core
32-Bit Structure
32b-Bit Data Bus Width
1-Core CPU
8kB RAM
144 I/Os
AM1802BZWTD3 Applications
There are a lot of Texas Instruments AM1802BZWTD3 Microprocessor applications.
- Aerospace navigation systems
- Kindle
- Virtual reality VR robots
- Laminators
- Sonography (Ultrasound imaging)
- Switches
- Leakage current tester
- Toys
- Gas monitoring systems
- Binding machines
