AM1806BZCED4
| Parameters | |
|---|---|
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Package / Case | 361-LFBGA |
| Number of Pins | 361 |
| Manufacturer Package Identifier | LFBGA-361 |
| Operating Temperature | -40°C~90°C TJ |
| Packaging | Tray |
| Series | Sitara™ |
| JESD-609 Code | e1 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 361 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 456MHz |
| Base Part Number | AM1806 |
| Pin Count | 361 |
| Operating Supply Voltage | 1.3V |
| Voltage | 1.35V |
| Interface | I2C, SPI, UART, USB |
| Max Supply Voltage | 1.35V |
| Min Supply Voltage | 1.25V |
| RAM Size | 8kB |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM926EJ-S |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Address Bus Width | 23 |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 3.3V |
| Number of UART Channels | 3 |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | LPDDR, DDR2 |
| USB | USB 2.0 + PHY (1) |
| Additional Interfaces | I2C, McASP, McBSP, SPI, MMC/SD, UART |
| Co-Processors/DSP | System Control; CP15 |
| Display & Interface Controllers | LCD |
| Height Seated (Max) | 1.4mm |
| Length | 16mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AM1806BZCED4 Overview
Shipping overseas is convenient since the embedded microprocessor is packed in 361-LFBGA. High reliability is achieved by using advanced packaging methods Tray. This CPU has 1 Core 32-Bit cores and 1 Core 32-Bit bus widths. Understand the operating temperature around -40°C~90°C TJ. This is part of the Sitara? series. The CPU is powered by a ARM926EJ-S core. LPDDR, DDR2 RAM controllers are used by this CPU. The microprocessor features interfaces I2C, McASP, McBSP, SPI, MMC/SD, UART for better service. The CPU runs at 1.8V 3.3V when it comes to I/O. It is a MICROPROCESSOR, RISC in terms of uPs/uCs/Peripheral ICs. Try searching for variants of the cpu microprocessor with AM1806. A total of 361 terminations have been recorded. When the voltage supply is 1.3V, the cpu microprocessor should be powered on and run. This microprocessor has an architecture of 32 bits. 456MHz Hz is the frequency at which the CPU operates. For information about 361 pins, please refer to the datasheet. Typical Microprocessors cpu microprocessor. Data can be transferred over 32b bandwidths. A total of 361 pins are injected into the CPU microprocessor's body. There are many applications for this CPU, since it is Surface Mount mounted. In this case, 1.3V is the starting point. A 1.35V core voltage is present on the CPU. In general, RAM (Random-Access Memory) is designed with a 8kB of 0MB. normally, the microprocessor should not receive a voltage higher than 1.35V. In order for the micro processor to work at its best, it should be fed a voltage of 1.25V. This embedded microprocessor is equipped with 3 UART (Universal Asynchro3us Receiver/Transmitter) channels
AM1806BZCED4 Features
ARM926EJ-S Core
32-Bit Structure
32b-Bit Data Bus Width
8kB RAM
AM1806BZCED4 Applications
There are a lot of Texas Instruments AM1806BZCED4 Microprocessor applications.
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Aerospace navigation systems
- Measurement and control field
- Removable disks
- Projector
- Embedded gateways
- Firewalls
- Smartphone
- Wastewater treatment
- Automatic control
