AM1806BZWT4
| Parameters | |
|---|---|
| Number of Pins | 361 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Series | Sitara™ |
| JESD-609 Code | e1 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 361 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 456MHz |
| Base Part Number | AM1806 |
| Pin Count | 361 |
| Operating Supply Voltage | 1.3V |
| Voltage | 1.35V |
| Interface | I2C, SPI, UART, USB |
| Max Supply Voltage | 1.35V |
| Min Supply Voltage | 1.25V |
| RAM Size | 8kB |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM926EJ-S |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Address Bus Width | 23 |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 3.3V |
| Number of UART Channels | 3 |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | LPDDR, DDR2 |
| USB | USB 2.0 + PHY (1) |
| Additional Interfaces | I2C, McASP, McBSP, SPI, MMC/SD, UART |
| Co-Processors/DSP | System Control; CP15 |
| Display & Interface Controllers | LCD |
| Height Seated (Max) | 1.4mm |
| Length | 16mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Package / Case | 361-LFBGA |
AM1806BZWT4 Overview
The embedded microprocessor ships overseas conveniently packed in 361-LFBGA. Advanced packaging method Tray is used to provide high reliability. The CPU has 1 Core 32-Bit cores/Bus width. Understand the operating temperature around 0°C~90°C TJ. It comes from the Sitara? series. A ARM926EJ-S processor is present in this CPU. A total of LPDDR, DDR2 RAM controllers are used by this CPU. A I2C, McASP, McBSP, SPI, MMC/SD, UART interface has been added to this microprocessor in order to serve the user better. The CPU runs at 1.8V 3.3V when it comes to I/O. In terms of uPs and uCs as well as peripheral ICs, this is a MICROPROCESSOR, RISC. If you are looking for variants of the cpu microprocessor, try search with AM1806. In total, there are 361 terminations. With a 1.3V voltage supply, the part should be turned on and run. This microprocessor has an architecture of 32 bits. There is 456MHz frequency set for the CPU. You can refer to the datasheets for the functions of 361 pins. As a typical Microprocessors, this cpu microprocessor has Microprocessors display. It is important to note that there is 32b bandwidth available for data transfer. 361 pins are injected into the part body. As a result of its Surface Mount mounting, this CPU is widely used in a wide variety of applications. From 1.3V on, the CPU microprocessor will function. 1.35V is the CPU core voltage. A 8kB amount of RAM (Random-Access Memory) is designed. In a normal situation, users should not supply the CPU microprocessor with a voltage higher than 1.35V. 1.25V should be the lowest voltage fed to the CPU microprocessor. 3 UART (Universal Asynchro3us Receiver/Transmitter) channels are provided with this CPU microprocessor
AM1806BZWT4 Features
ARM926EJ-S Core
32-Bit Structure
32b-Bit Data Bus Width
8kB RAM
AM1806BZWT4 Applications
There are a lot of Texas Instruments AM1806BZWT4 Microprocessor applications.
- Automatic control
- Gas monitoring systems
- Entertainment products
- Washing machine
- Switches
- Automobile
- Consumer electronics products
- Robotic prosthetic limbs
- Network application field
- Embedded gateways
