AM1808BZCE3
| Parameters | |
|---|---|
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Package / Case | 361-LFBGA |
| Number of Pins | 361 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Series | Sitara™ |
| JESD-609 Code | e1 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 361 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.65mm |
| Frequency | 300MHz |
| Base Part Number | AM1808 |
| Pin Count | 361 |
| Voltage | 1.32V |
| Interface | I2C, SPI, UART, USB |
| Max Supply Voltage | 1.3V |
| Min Supply Voltage | 950mV |
| Memory Size | 64kB |
| RAM Size | 8kB |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM926EJ-S |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 4 |
| Address Bus Width | 23 |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 3.3V |
| Number of UART Channels | 3 |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | LPDDR, DDR2 |
| USB | USB 1.1 + PHY (1), USB 2.0 + PHY (1) |
| Additional Interfaces | I2C, McASP, McBSP, SPI, MMC/SD, UART |
| Co-Processors/DSP | System Control; CP15 |
| Display & Interface Controllers | LCD |
| SATA | SATA 3Gbps (1) |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AM1808BZCE3 Overview
The microprocessor is conveniently packaged in 361-LFBGA, making it easy to ship internationally. High reliability is provided by the advanced packaging method Tray. This CPU has 1 Core 32-Bit cores and 1 Core 32-Bit bus widths. Obtain a basic understanding of operating temperature around 0°C. In the series Sitara?, it is found. A ARM926EJ-S processor powers this CPU. It has LPDDR, DDR2 RAM controllers. This microprocessor is equipped with an interface of I2C, McASP, McBSP, SPI, MMC/SD, UART. 1.8V 3.3V is the I/O speed of this CPU. There is MICROPROCESSOR, RISC MICROPROCESSOR, RISC in the uPs, uCs, or peripheral ICs categories. If you are looking for variants of the cpu microprocessor, try search with AM1808. There are 361 terminations totally. When the voltage supply is 1.2V, the cpu microprocessor should be powered on and run. An architecture based on 32 bits is used. CPUs operate at 300MHz Hz. Please refer to the datasheets for 361 pins functions. Microprocessors is a typical embedded microprocessor. Generally, data transfer takes place at a rate of 32b bandwidth. Injecting pins into the embedded microprocessor body results in 361 pins. Many applications make use of this CPU, which has Surface Mount mounted. There is 1.32V voltage at the CPU core. In this case, the amount of RAM (Random-Access Memory) is set to 8kB. Users should not supply the embedded microprocessor with voltages higher than 1.3V in normalcircumstances. 950mV should be the lowest voltage fed to the CPU microprocessor. 64kB is the size of the CPU's memory. Counters 4 indicate how busy the CPU is. This embedded microprocessor is equipped with 3 UART (Universal Asynchro3us Receiver/Transmitter) channels
AM1808BZCE3 Features
ARM926EJ-S Core
32-Bit Structure
32b-Bit Data Bus Width
8kB RAM
AM1808BZCE3 Applications
There are a lot of Texas Instruments AM1808BZCE3 Microprocessor applications.
- Ipod
- Mobile computers
- Heater/Fan
- Scanners
- Calculator
- Industrial instrumentation devices
- Calculators
- Traditional industrial transformation
- Smartphone
- Hand-held metering systems
