AM1808BZCE4
| Parameters | |
|---|---|
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Package / Case | 361-LFBGA |
| Number of Pins | 361 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Series | Sitara™ |
| JESD-609 Code | e1 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 361 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 456MHz |
| Base Part Number | AM1808 |
| Pin Count | 361 |
| Operating Supply Voltage | 1.3V |
| Voltage | 1.35V |
| Interface | I2C, SPI, UART, USB |
| Max Supply Voltage | 1.35V |
| Min Supply Voltage | 1.25V |
| Memory Size | 32kB |
| RAM Size | 8kB |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM926EJ-S |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 4 |
| Address Bus Width | 23 |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 3.3V |
| Number of UART Channels | 3 |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | LPDDR, DDR2 |
| USB | USB 1.1 + PHY (1), USB 2.0 + PHY (1) |
| Additional Interfaces | I2C, McASP, McBSP, SPI, MMC/SD, UART |
| Co-Processors/DSP | System Control; CP15 |
| Display & Interface Controllers | LCD |
| SATA | SATA 3Gbps (1) |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AM1808BZCE4 Overview
The embedded microprocessor ships overseas conveniently packed in 361-LFBGA. In order to provide high reliability, advanced packaging method Tray is used. The CPU has 1 Core 32-Bit cores/Bus width. Understand how the operating temperature around 0°C~90°C TJ is determined. It comes from the Sitara? series. With a core count of ARM926EJ-S, this CPU is multicore. A CPU with this architecture uses LPDDR, DDR2 RAM controllers. This microprocessor is equipped with an interface of I2C, McASP, McBSP, SPI, MMC/SD, UART. This CPU runs I/O at 1.8V 3.3V. A MICROPROCESSOR, RISC represents the uPs/uCs/Peripheral ICs type. The microprocessor can be searched for with AM1808 if you are looking for variants. In total, 361 terminations have been made. With a 1.3V voltage supply, the part should be turned on and run. This microprocessor has an architecture of 32 bits. 456MHz is the frequency of the CPU. For functions of 361 pins, please refer to the datasheets. As a Microprocessors, this cpu microprocessor is typical. Data transfer has 32b bandwidths. The CPU microprocessor body is injected with 361 pins. With the Surface Mount mounted, this CPU is widely used in a wide range of applications. The micro processor can function from 1.3V. Currently, the CPU core voltage is 1.35V. It is designed with 0 RAM (Random-Access Memory). A voltage greater than 1.35V should not normally be applied to the embedded microprocessor. 1.25V should be the lowest voltage fed to the CPU microprocessor. There is 32kB memory on the CPU. A CPU's 4 counters indicate how busy it is. This embedded microprocessor has 3 UART (Universal Asynchro3us Receiver/Transmitter) channels
AM1808BZCE4 Features
ARM926EJ-S Core
32-Bit Structure
32b-Bit Data Bus Width
8kB RAM
AM1808BZCE4 Applications
There are a lot of Texas Instruments AM1808BZCE4 Microprocessor applications.
- Wastewater treatment
- Smoke alarms
- Guidance-GPS
- Playstation
- Network communication, mobile communication field
- Pacemakers (used to control abnormal heart rhythm)
- Glucose monitoring systems (for Type 1 Diabetes)
- Toys
- Gas monitoring systems
- 3D printers
