AM1808BZCED4
| Parameters | |
|---|---|
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Package / Case | 361-LFBGA |
| Number of Pins | 361 |
| Operating Temperature | -40°C~90°C TJ |
| Packaging | Tray |
| Series | Sitara™ |
| JESD-609 Code | e1 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 361 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 456MHz |
| Base Part Number | AM1808 |
| Pin Count | 361 |
| Voltage | 1.35V |
| Interface | I2C, SPI, UART, USB |
| Max Supply Voltage | 1.3V |
| Min Supply Voltage | 950mV |
| Memory Size | 64kB |
| RAM Size | 8kB |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM926EJ-S |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 4 |
| Address Bus Width | 23 |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 3.3V |
| Number of UART Channels | 3 |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | LPDDR, DDR2 |
| USB | USB 1.1 + PHY (1), USB 2.0 + PHY (1) |
| Additional Interfaces | I2C, McASP, McBSP, SPI, MMC/SD, UART |
| Co-Processors/DSP | System Control; CP15 |
| Display & Interface Controllers | LCD |
| SATA | SATA 3Gbps (1) |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AM1808BZCED4 Overview
Since the microprocessor is packed in 361-LFBGA, shipping overseas is convenient. High reliability is achieved with advanced packaging method Tray. 1 Core 32-Bit cores/Bus width are present in the CPU. Identify the operating temperature around -40°C~90°C TJ. In the Sitara? series, it is found. With a core count of ARM926EJ-S, this CPU is multicore. There are LPDDR, DDR2 RAM controllers used by this CPU. Featuring I2C, McASP, McBSP, SPI, MMC/SD, UART interfaces, this microprocessor can better serve you. 1.8V 3.3V is the I/O speed of this CPU. There is MICROPROCESSOR, RISC MICROPROCESSOR, RISC in the uPs, uCs, or peripheral ICs categories. Try searching for variants of the cpu microprocessor with AM1808. Total terminations are 361. A 1.3V voltage supply should be used to turn on and run the cpu microprocessor. There is a 32-Bit architecture in it. CPUs operate with a frequency of 456MHz Hz. You can find information about the functions of 361 pins in the datasheets. Typical Microprocessors cpu microprocessor. To transfer data, there is a bandwidth of 32b. Injecting pins into the embedded microprocessor body results in 361 pins. There are many applications for this CPU, since it is Surface Mount mounted. The CPU core voltage is 1.35V. In general, RAM (Random-Access Memory) is designed with a 8kB of 0MB. Microprocessors should never be supplied with voltages above 1.3V in normalcircumstances. In order for the micro processor to work at its best, it should be fed a voltage of 950mV. Its memory size is 64kB. CPU activity is measured by the 4 counters. 3 UART (Universal Asynchro3us Receiver/Transmitter) channels are provided with this CPU microprocessor
AM1808BZCED4 Features
ARM926EJ-S Core
32-Bit Structure
32b-Bit Data Bus Width
8kB RAM
AM1808BZCED4 Applications
There are a lot of Texas Instruments AM1808BZCED4 Microprocessor applications.
- Smartphone
- Smartphones-calling, video calling, texting, email
- Air fryers
- Robots
- Teletext terminals
- Heart rate monitors
- Medical instruments
- Network application field
- PDAs, game consoles
- Petrochemical
