AM1810BZWTA3
| Parameters | |
|---|---|
| Address Bus Width | 16 |
| Core Architecture | ARM |
| Voltage - I/O | 1.8V 3.3V |
| Number of UART Channels | 3 |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | LPDDR, DDR2 |
| USB | USB 1.1 + PHY (1), USB 2.0 + PHY (1) |
| Additional Interfaces | I2C, McASP, McBSP, SPI, MMC/SD, UART |
| Co-Processors/DSP | System Control; CP15 |
| ROM Programmability | FLASH |
| Display & Interface Controllers | LCD |
| SATA | SATA 3Gbps (1) |
| Length | 16mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Package / Case | 361-LFBGA |
| Number of Pins | 361 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Series | Sitara™ |
| JESD-609 Code | e1 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 361 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.8mm |
| Frequency | 375MHz |
| Base Part Number | AM1810 |
| Pin Count | 361 |
| Voltage | 1.32V |
| Interface | I2C, SPI, UART |
| Max Supply Voltage | 1.2V |
| Min Supply Voltage | 950mV |
| Memory Size | 64kB |
| Number of I/O | 144 |
| RAM Size | 8kB |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM926EJ-S |
| Bit Size | 32 |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 4 |
AM1810BZWTA3 Overview
The embedded microprocessor ships overseas conveniently packed in 361-LFBGA. High reliability is achieved with advanced packaging method Tray. The CPU has 1 Core 32-Bit cores/Bus width. It is important to understand the operating temperature around -40°C~105°C TJ. Sitara? is its series number. This CPU is cored with a ARM926EJ-S processor. There are LPDDR, DDR2 RAM controllers used by this CPU. The microprocessor features interfaces I2C, McASP, McBSP, SPI, MMC/SD, UART for better service. 1.8V 3.3V is the I/O speed of this CPU. This is a MICROCONTROLLER, RISC for the uPs/uCs/Peripheral ICs type. The microprocessor can be searched for with AM1810 if you are looking for variants. In total, 361 terminations have been made. The microprocessor should be turned on and run with a voltage supply of 1.2V volts. The architecture of the microprocessor is 32-bit. A CPU operates at a frequency of 375MHz. For functions of 361 pins, please refer to the datasheets. A typical Microprocessors embedded microprocessor. The bandwidth required to transfer data is 32b. Injection of 361 pins into the body of the embedded microprocessor is carried out. This CPU is widely used in a variety of applications with its Surface Mount mounting. A 1.32V core voltage is present on the CPU. In this case, the amount of RAM (Random-Access Memory) is set to 8kB. It is generally recommended that users do not supply their embedded microprocessors with voltages higher than 1.2V. It is recommended that the lowest voltage be fed to the micro processor is 950mV. In CPU programs, data is transferred by 144 I/Os. CPU memory is sized 64kB. An indication of CPU load is provided by 4 counters. The CPU microprocessor is equipped with 3 UART (Universal Asynchro3us Receiver/Transmitter) channels
AM1810BZWTA3 Features
ARM926EJ-S Core
32-Bit Structure
32b-Bit Data Bus Width
8kB RAM
144 I/Os
AM1810BZWTA3 Applications
There are a lot of Texas Instruments AM1810BZWTA3 Microprocessor applications.
- Home appliances
- Aerospace navigation systems
- Radio
- Traditional industrial transformation
- Binding machines
- Projector
- Hand-held metering systems
- Automatic staplers
- Projectors
- Guidance-GPS
