AM26C32ID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Receiver |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | AM26C32 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Operating Supply Current | 15mA |
| Nominal Supply Current | 15mA |
| Max Supply Current | 15mA |
| Data Rate | 10 Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | NO |
| Output Polarity | TRUE |
| Protocol | RS422, RS423 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 0/4 |
| Receiver Hysteresis | 60mV |
| ESD Protection | No |
| Receive Delay-Max | 27 ns |
| Supply Voltage1-Nom | 5V |
| Number of Receivers | 4 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AM26C32ID Overview
An excellent driver IC for common LEDs thanks to its enhanced 16-SOIC (0.154, 3.90mm Width) package.Tube package is used for this receiver.As a Receiver can transceiver, this part has enabled many applications to be served.The wide receiver can be mounted on any Surface Mount-type PCB or development board.This differential driver uses 4.5V~5.5V for power supply.It is possible to have up to 0/4 receivers/drivers in use simultaneously with this electronic part.As its name implies, this ic receiver is designed for applications where -40°C~85°C is the operating temperature.Driver ICs in this category can operate efficiently with a supply voltage range of 5V.Wide receiver has 16 terminations built in for driving or receiving signals from data.This transceiver is packaged with 16 market standard pinoutsSince the part number AM26C32 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.An enhanced power dissipation control is provided by this 16-pin driver IC.This transceiver module is designed to operate from an input voltage supply of 5V.Driver ICs are designed to work with a 5V power supply and this driver IC is one of them.There are also 4 receivers in it as well.On the integrator circuit, there are 0 drivers embedded.Input voltage is set to a value of 15mA, and this integrating circuit is capable of driving LEDs with that voltage.If the input current exceeds 15mA, this can transceiver could malfunction.
AM26C32ID Features
Tube package
16 pin count
16 pins
5V power supply
AM26C32ID Applications
There are a lot of Texas Instruments AM26C32ID Drivers/Receivers/Transceivers applications.
- Optical sub-assembly (OSA)
- Satellite communications networks
- IPTV front end
- Wired telephone
- Home theater wiring-free
- Radio transmission
- Wireless access points
- Cell phones
- SONET/SDH Network
- High-speed computer links
