AM26LS31CDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Driver |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | AM26LS31 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Data Rate | 10 Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | STANDARD |
| Number of Drivers/Receivers | 4/0 |
| Number of Drivers | 4 |
| ESD Protection | No |
| Transmit Delay-Max | 20 ns |
| Supply Voltage1-Nom | 5V |
| Output Low Current-Max | 0.02A |
| Out Swing-Min | 2 V |
| High Level Input Current-Max | 0.00002A |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AM26LS31CDR Overview
Due to the enhanced 16-SOIC (0.154, 3.90mm Width) package, this driver IC is excellent for driving common LEDs.Tape & Reel (TR) package is used to mount this receiver.Since this is a Driver can transceiver, many solutions can use it for a variety of functions.On any Surface Mount-type PCB or development board, you can install this wide receiver.This differential driver uses 4.75V~5.25V for power supply.Up to 4/0 receivers/drivers can be installed simultaneously on this electronic part.In most applications, this ic receiver is used in environments where 0°C~70°C is the operating temperature.Driver ICs in this category can operate efficiently with a supply voltage range of 5V.For driving and receiving signals from data, this wide receiver has 16 terminations integrated.There are 16 pinouts available on this transceiver which are market standard.For more variants of this part, try searching with the base part number AM26LS31, which indicates the product type, temperature, package, etc.16-pin driver chip with enhanced power dissipation.There is a 5V input voltage supply that can be used to operate this transceiver module.There is one driver IC in this package which is intended to be operated by 5V of power.The integrator circuit is embedded with 4 drivers.In the case of input current exceeding 80mA, this can transceiver may malfunction.
AM26LS31CDR Features
Tape & Reel (TR) package
16 pin count
16 pins
5V power supply
AM26LS31CDR Applications
There are a lot of Texas Instruments AM26LS31CDR Drivers/Receivers/Transceivers applications.
- IP cameras
- Bridges
- Wireless 3D game
- Metro access rings
- LAN, SAN, WAN (local, storage, work area networks)
- Car alarm systems
- Wireless modems
- IPTV front end
- Wireless network systems
- Servers
