AM26LS32ACD
| Parameters | |
|---|---|
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Receiver |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Current Rating | 8A |
| Base Part Number | AM26LS32 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 4 |
| Operating Supply Current | 70mA |
| Nominal Supply Current | 70mA |
| Max Supply Current | 70mA |
| Data Rate | 10 Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | NO |
| Output Polarity | TRUE |
| Protocol | RS422, RS423 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 0/4 |
| Receiver Number of Bits | 4 |
| Receiver Hysteresis | 50mV |
| ESD Protection | No |
| Receive Delay-Max | 35 ns |
| Supply Voltage1-Nom | 5V |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
AM26LS32ACD Overview
The enhanced 16-SOIC (0.154, 3.90mm Width) package makes it an excellent LED driver.The Tube package houses this receiver.Since this is a Receiver can transceiver, many solutions can use it for a variety of functions.A Surface Mount-type PCB or development board can be used to place this wide receiver.This differential driver uses 4.75V~5.25V for power supply.It is possible to have up to 0/4 receivers/drivers in use simultaneously with this electronic part.IC receiver has been designed primarily for applications operating at 0°C~70°C.There is a voltage range of 5V for this line driver ic, so it can operate efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.The transceiver is packaged with 16 market standard pinouts so that it can be easily used.The base part number AM26LS32 identifies the product type, temperature, package, etc., so you can search for more variants by using it.An enhanced power dissipation driver IC with 16 pins.This receiver is typically specified with a resolution of 4 bits. There is a 5V input voltage supply that can be used to operate this transceiver module.There is one driver IC that is designed to operate from a 5V power supply, and only one driver IC in total.On the integrator circuit, there are 0 drivers embedded.Using the input voltage of 70mA, this integrating circuit is capable of driving LEDs with an output voltage of 12 volts.A malfunction could occur when the input current exceeds 70mA.In total, this optical transceiver contains 4 channels in order to meet the needs of this apploptical transceiveration.
AM26LS32ACD Features
Tube package
16 pin count
16 pins
5V power supply
4 channels
AM26LS32ACD Applications
There are a lot of Texas Instruments AM26LS32ACD Drivers/Receivers/Transceivers applications.
- Wireless HD Photography
- Datacom networking applications
- Satellite radio receiver
- Interconnection between switches and computers
- Car radio
- Ship
- VoIP phones
- SONET/SDH Network
- Precision geodetic measurement
- Tuner
