AM26LS32ACN
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Receiver |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Current Rating | 8A |
| Base Part Number | AM26LS32 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 4 |
| Operating Supply Current | 70mA |
| Nominal Supply Current | 70mA |
| Max Supply Current | 70mA |
| Data Rate | 10 Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | NO |
| Output Polarity | TRUE |
| Protocol | RS422, RS423 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 0/4 |
| Receiver Number of Bits | 4 |
| Receiver Hysteresis | 50mV |
| ESD Protection | No |
| Receive Delay-Max | 35 ns |
| Supply Voltage1-Nom | 5V |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
AM26LS32ACN Overview
The enhanced 16-DIP (0.300, 7.62mm) package makes it an excellent LED driver.Tube package is used to mount this receiver.As a Receiver can transceiver, this part has enabled many applications to be served.This wide receiver can be placed on any Through Hole-type PCB or development board.This differential driver requires a 4.75V~5.25V power supply.There can be up to 0/4 eligible receivers/drivers on the field at the same time with this electronic part.IC receiver's like this are designed for applications requiring a 0°C~70°C operating temperature.An output voltage range of 5V is sufficient to run this line driver ic efficiently.For driving and receiving signals from data, this wide receiver has 16 terminations integrated.A package consisting of 16 market standard pinouts is provided with this integrated circuit.The base part number AM26LS32 identifies the product type, temperature, package, etc., so you can search for more variants by using it.An enhanced power dissipation control is provided by this 16-pin driver IC.There are typically 4 bits of resolution specified in the specifications of this receiver.This transceiver module is designed to operate from an input voltage supply of 5V.This driver IC is designed to operate from a 5V power supply.The integrator circuit comes with embedded 0 drivers.With this integrating circuit you can drive LEDs of a voltage of up to 70mA. It can be used to drive large displays.If the input current exceeds 70mA, this can transceiver could malfunction.It is a 4-channel optical transceiver that has been embedded with a single chip.
AM26LS32ACN Features
Tube package
16 pin count
16 pins
5V power supply
4 channels
AM26LS32ACN Applications
There are a lot of Texas Instruments AM26LS32ACN Drivers/Receivers/Transceivers applications.
- Cell phones
- Bridges
- TV signal transmission
- VoIP phones
- Broadcast application
- Wireless transmission
- Single fiber bidirectional application
- Wired telephone
- Long-distance fiber optic network applications
- WDM transmission
