AM26LS32AID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Receiver |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Current Rating | 70mA |
| Base Part Number | AM26LS32 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Operating Supply Current | 70mA |
| Nominal Supply Current | 70mA |
| Max Supply Current | 70mA |
| Data Rate | 10 Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | NO |
| Output Polarity | TRUE |
| Protocol | RS422, RS423 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 0/4 |
| Receiver Hysteresis | 50mV |
| ESD Protection | No |
| Receive Delay-Max | 35 ns |
| Supply Voltage1-Nom | 5V |
| Number of Receivers | 4 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AM26LS32AID Overview
This LED driver IC features an enhanced 16-SOIC (0.154, 3.90mm Width) package for driving common LEDs.In this package, the receiver is mounted in the Tube format.As a Receiver can transceiver, this part has enabled many applications to be served.A Surface Mount-type PCB or development board can be used to place this wide receiver.This differential driver uses 4.75V~5.25V for power supply.As many as 0/4 eligible receivers/drivers can be used simultaneously with this electronic part.In most applications, this ic receiver is used in environments where -40°C~85°C is the operating temperature.There is a voltage range of 5V for this line driver ic, so it can operate efficiently.In order to drive and receive signals from data, this wide receiver has 16 terminations integrated.It is packaged with 16 pinouts that are market standard for this particular transceiver.The base part number AM26LS32 identifies the product type, temperature, package, etc., so you can search for more variants by using it.A 16-pin driver IC with enhanced power dissipation control is featured here.As a result of the design of this transceiver module, the input voltage supply is designed to operate at 5V.3 volts.There is one driver IC in this package which is intended to be operated by 5V of power.There are 4 receivers inside.On the integrator circuit are embedded 0 drivers.With an input voltage of 70mA, this integrating circuit has the ability to drive LEDs with an output voltage of 70mA.can transceivers with an input current greater than 70mA may have malfunctions.
AM26LS32AID Features
Tube package
16 pin count
16 pins
5V power supply
AM26LS32AID Applications
There are a lot of Texas Instruments AM26LS32AID Drivers/Receivers/Transceivers applications.
- Bridges
- Servers
- Tuner
- Desktop PC
- Long-distance fiber optic network applications
- Sensor reporting
- Structural bonding
- TV signal transmission
- Mainframes, workstations or storage devices
- Radio transmission
