AM26S10CD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Additional Feature | COMMON I/O |
| Max Power Dissipation | 950mW |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | AM26S10 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Nominal Supply Current | 45mA |
| Output Current | 100mA |
| Max Supply Current | 80mA |
| Propagation Delay | 18 ns |
| Output Characteristics | OPEN-COLLECTOR |
| Differential Output | NO |
| Input Characteristics | STANDARD |
| Number of Drivers/Receivers | 4/4 |
| High Level Output Current | -1mA |
| Low Level Output Current | 100mA |
| Receiver Number of Bits | 4 |
| Duplex | Full |
| Interface Standard | GENERAL PURPOSE |
| Number of Drivers | 4 |
| Number of Transceivers | 1 |
| ESD Protection | No |
| Supply Voltage1-Nom | 5V |
| Out Swing-Min | 2.7 V |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AM26S10CD Overview
The enhanced 16-SOIC (0.154, 3.90mm Width) package makes it an excellent LED driver.The Tube package houses this receiver.Several solutions have used this Transceiver can transceiver in a variety of applications due to its Transceiver IC nature.On any Surface Mount-type PCB or development board, this wide receiver can be placed.This differential driver uses 4.75V~5.25V for power supply.At any given time, there can be up to 4/4 eligible receivers/drivers for this electronic part.As its name implies, this ic receiver is designed for applications where 0°C~70°C is the operating temperature.Driver ICs with a supply voltage range of 5V can operate efficiently.16 terminations are integrated into this wide receiver for driving and receiving signals from data.Transceiver comes with 16 standard pinouts that meet the market's requirements.With the part number AM26S10 identifying the product type, temperature, package, etc., you can search with it to see more variants.16-pin driver chip with enhanced power dissipation.This package size decreases dramatically due to optical transceiver downsizing and high-density Surface Mount mounting technologies.As a rule of thumb, this receiver is typically specified with a resolution of 4 bits.As mentioned above, the transceiver module is designed to operate from an input voltage supply of 5V.This IC implements 1 transceivers overall.The integrator circuit has embedded 4 drivers.Additionally, this optical transceiver module features the COMMON I/O function, which improves the stability and accuracy of signal management in general.can transceivers with an input current greater than 80mA may have malfunctions.As a result of this bluetooth transceiver, its output current is 100mA.
AM26S10CD Features
Tube package
16 pin count
16 pins
AM26S10CD Applications
There are a lot of Texas Instruments AM26S10CD Drivers/Receivers/Transceivers applications.
- IPTV front end
- Metro access rings
- VoIP phones
- Mainframes, workstations or storage devices
- Copper connection network
- Sensor reporting
- Gigabit Ethernet
- Laser diode bonding
- Radio transmission
- Aircraft positioning
