AM3703CBC100
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Package / Case | 515-VFBGA, FCBGA |
| Number of Pins | 515 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Series | Sitara™ |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 515 |
| ECCN Code | 5A992.C |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.1V |
| Terminal Pitch | 0.5mm |
| Frequency | 1GHz |
| Base Part Number | AM3703 |
| Pin Count | 515 |
| Operating Supply Voltage | 1.1V |
| Voltage | 1.8V |
| Max Supply Voltage | 1.5V |
| RAM Size | 64kB |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM® Cortex®-A8 |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 16 |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| RAM (words) | 65536 |
| Number of UART Channels | 4 |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | SDRAM |
| USB | USB 2.0 (4) |
| Additional Interfaces | HDQ/1-Wire, I2C, McBSP, McSPI, MMC/SD/SDIO, UART |
| Co-Processors/DSP | Multimedia; NEON™ SIMD |
| Number of Cores | 1 |
| Display & Interface Controllers | LCD |
| Height | 950μm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 630μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AM3703CBC100 Overview
The microprocessor is convenient for international shipping since it is packaged in 515-VFBGA, FCBGA. The packaging method Tray provides high reliability. There are 1 Core 32-Bit cores per bus width on the CPU. Be aware of the operating temperature around 0°C~90°C TJ. From the Sitara? series. The CPU is cored by a processor with a number of 0 cores. Memory controllers for this CPU are SDRAM. This microprocessor features interfaces HDQ/1-Wire, I2C, McBSP, McSPI, MMC/SD/SDIO, UART. uPs/uCs/Peripheral ICs are a MICROPROCESSOR, RISC. The microprocessor can be searched for with AM3703 if you are looking for variants. As a whole, there are 515 terminations. When the voltage supply is 1.1V, the cpu microprocessor should be powered on and run. In terms of architecture, it is a 32-Bit system. A CPU operates at a frequency of 1GHz. You can find information about the functions of 515 pins in the datasheets. Microprocessors is a typical embedded microprocessor. Data transfer has 16b bandwidths. Embedded microprocessor bodies are injected with 515 pins. There is only 1 core in this processor. Many applications make use of this CPU, which has Surface Mount mounted. From 1.1V, the micro processor can be used. The CPU core voltage is 1.8V. It is designed with 0 RAM (Random-Access Memory). Users should not supply a microprocessor with more voltage than 1.5V under normalcircumstances. It is possible to tell how busy the CPU is by using 16 counters. A total of 4 UART (Universal Asynchro4us Receiver/Transmitter) channels are available on this embedded microprocessor
AM3703CBC100 Features
ARM? Cortex?-A8 Core
32-Bit Structure
16b-Bit Data Bus Width
1-Core CPU
64kB RAM
AM3703CBC100 Applications
There are a lot of Texas Instruments AM3703CBC100 Microprocessor applications.
- Virtual reality VR robots
- 8. Navigation control field
- Xbox
- Safety field
- X-ray
- Dishwashers
- Leakage current tester
- Computed Tomography (CT scan)
- Magnetic resonance imaging (MRI)
- DCS control intelligent sensor
