AM4377BZDND80
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Package / Case | 491-LFBGA |
| Number of Pins | 491 |
| Operating Temperature | -40°C~90°C TJ |
| Packaging | Tray |
| Series | Sitara™ |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 491 |
| ECCN Code | 5A992.C |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1.26V |
| Frequency | 800MHz |
| Base Part Number | AM4377 |
| Pin Count | 491 |
| Interface | CAN, I2C, SPI, UART |
| RAM Size | 64kB |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM® Cortex®-A9 |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 3.3V |
| Number of UART Channels | 6 |
| Ethernet | 10/100/1000Mbps (2) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | LPDDR2, DDR3, DDR3L |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | CAN, HDQ/1-Wire, I2C, McASP, MMC/SD/SDIO, QSPI, SPI, SD/SDIO, UART |
| Co-Processors/DSP | Multimedia; NEON™ SIMD |
| Number of Cores | 1 |
| Security Features | Crypto Accelerator |
| Display & Interface Controllers | TSC, WXGA |
| Height | 1.3mm |
| Length | 17mm |
| Width | 17mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AM4377BZDND80 Overview
With a packing size of 491-LFBGA, this embedded microprocessor is ideal for international shipping. Advanced packaging method Tray is used to provide high reliability. Cores/Bus width is 1 Core 32-Bit. The operating temperature around -40°C~90°C TJ should be understood. From the Sitara? series. The CPU is powered by a ARM? Cortex?-A9 core. The CPU contains LPDDR2, DDR3, DDR3L RAM controllers. Microprocessors with CAN, HDQ/1-Wire, I2C, McASP, MMC/SD/SDIO, QSPI, SPI, SD/SDIO, UART interfaces are designed to serve users better. There is 1.8V 3.3V I/O running on this CPU. As far as the uPs/uCs/Peripheral ICs type is concerned, this is a MICROPROCESSOR, RISC. Use AM4377 when searching for variants of the embedded microprocessor. In total, there are 491 terminations. Using a 1.26V voltage supply, the microprocessor should turn on and run. 32-Bit is its architecture. There is 800MHz frequency set for the CPU. Detailed functions for 491 pins can be found in the datasheets. It is important to note that there is 32b bandwidth available for data transfer. Embedded microprocessor bodies are injected with 491 pins. There is only 1 core in this processor. Surface Mount mounted, this CPU is widely used in many applications. There is 64kB RAM (Random Access Memory) built in. It features 6 UART (Universal Asynchro6us Receiver/Transmitter) channels
AM4377BZDND80 Features
ARM? Cortex?-A9 Core
32-Bit Structure
32b-Bit Data Bus Width
1-Core CPU
64kB RAM
AM4377BZDND80 Applications
There are a lot of Texas Instruments AM4377BZDND80 Microprocessor applications.
- Safety -airbags, automatic braking system (ABS)
- Speed meter
- Industrial robot
- Equipment control
- Process control devices
- Toasters
- Consumer electronics products
- Measurement and control field
- Oil and gas
- X-ray
