AMC1200SDUB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD, Gull Wing |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C |
| Packaging | Bulk |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Packing Method | TUBE |
| Max Power Dissipation | 44mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | AMC1200 |
| Pin Count | 8 |
| Output Type | Differential |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Operating Supply Current | 5.4mA |
| Nominal Supply Current | 5.4mA |
| Power Dissipation | 44mW |
| Output Current | 20mA |
| Max Supply Current | 10mA |
| Amplifier Type | Isolation |
| Common Mode Rejection Ratio | 95 dB |
| Max Input Voltage | 320mV |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 200μV |
| Bandwidth | 100 kHz |
| Gain Bandwidth Product | 100 kHz |
| Power Supply Rejection Ratio (PSRR) | 61dB |
| Power Consumption | 82.5mW |
| -3db Bandwidth | 100MHz |
| Dual Supply Voltage | 5V |
| Max Supply Voltage (DC) | 5.5V |
| Isolation Voltage | 4kV |
| Min Supply Voltage (DC) | 2.7V |
| Non-linearity-Max | 0.075% |
| Height | 4.85mm |
| Length | 9.5mm |
| Width | 6.57mm |
| Thickness | 3.3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AMC1200SDUB Overview
Packaging for the buffer amplifier is in the form of a 8-SMD, Gull Wing case. An op amp of this type is a Isolation-type. Instrumentation amplifier is delivered in a Bulk case. We are approaching the 8h termination of the year. Buffer amplifier has a total of 8 pins. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. 8 pins are included on the operational amplifiers. Op amp ic rates 200μV for input offset voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. With regard to operating temperature, this op amp functions well at -40°C~105°C. The buffer amplifier is capable of operating from a supply current of 5.4mA . On the buffer amps, there are 1 channels that can be used. On the output type, there are Differential different types of op amps. The operating supply voltage of instrumentation amplifier is rated 5.5V voltage. This linear amplifier pack is based on the TUBE axis.
AMC1200SDUB Features
8 Pins
supply voltage of 5V
Output Type: Differential
AMC1200SDUB Applications
There are a lot of Texas Instruments AMC1200SDUB Instrumentational OP Amps applications.
- Displayers for aircraft and air transportation control systems
- Measurements of Wheatstone bridge
- Cinema or auditorium audio system
- Proportional counter tubes
- Biopotential
- Computer workstations
- Weighing systems
- High gain DC amplifier
- Switching amplifier
- Signal operation
