AMIS-49200-XTD
| Parameters | |
|---|---|
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 44-LQFP |
| Number of Pins | 44 |
| Supplier Device Package | 44-LQFP (10x10) |
| Weight | 356.09836mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Published | 2008 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | Transceiver |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.75V~6.2V |
| Base Part Number | AMIS-49200 |
| Max Supply Voltage | 6.2V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 800μA |
| Nominal Supply Current | 800μA |
| Max Supply Current | 800μA |
| Logic Function | AND, Transceiver |
| Data Rate | 32.25Kbps |
| Halogen Free | Halogen Free |
| Protocol | MDS-MAU |
| Number of Drivers/Receivers | 1/1 |
| Dual Supply Voltage | 6.2V |
| Duplex | Half |
| Receiver Hysteresis | 250mV |
| Number of Drivers | 1 |
| Number of Transceivers | 1 |
| Number of Receivers | 1 |
| Number of Transmitters | 1 |
| Number of Receive Buffers | 1 |
| Number of Transmit Buffers | 1 |
| Height | 1.4mm |
AMIS-49200-XTD Overview
Designed for common LEDs, this driver IC features an enhanced 44-LQFP package.The package of this receiver is Tray.As a Transceiver can transceiver, this part has enabled many applications to be served.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.This differential driver consumes 4.75V~6.2V for its power supplyAt any given time, there can be up to 1/1 eligible receivers/drivers for this electronic part.Applications with operating temperatures of -40°C~85°C have been designed primarily for this ic receiver.You can search with AMIS-49200 to get more variants of this part, since it identifies the product type, temperature, package, etc.Wide receiver with enhanced power dissipation control, 44-pin.In total, there are 1 transceivers implemented by this module isolated transceiver.Additionally, there are 1 receivers included in the package.1 drivers are embedded on the integrator circuit.It must be below 85°C when the transceiver module's system is operating.There must be no minimum operating temperature for this optical transceiver, which is -40°C.Using a 800μA input voltage, this integrating circuit is capable of driving LEDs with an output voltage of 20 V.It is specified that the transceiver's maximum supply voltage for this IC shall be 6.2V.In total, 1 transmitters have been installed, which produce radio waves and transmit data by using antennas to send data.A can transceiver that has a current input of 800μA or greater may be affected by malfunctions.This line driver ic requires a minimum supply voltage of 3V to function properly.As part of the 44-LQFP (10x10) supplier package, this line driver ic is integrated into the system.
AMIS-49200-XTD Features
Tray package
44 pins
AMIS-49200-XTD Applications
There are a lot of ON Semiconductor AMIS-49200-XTD Drivers/Receivers/Transceivers applications.
- Wireless security systems
- Desktop radio
- Satellite communication
- Clock radio
- Pocket PC
- Automation systems
- Optical sub-assembly (OSA)
- LAN, SAN, WAN (local, storage, work area networks)
- Wireless access points
- Fiber optic cable connection network
