AMIS30532C5321RG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-VQFN Exposed Pad |
| Number of Pins | 32 |
| Operating Temperature | -40°C~172°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Base Part Number | AMIS-30532 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Output Voltage | 40V |
| Supply Voltage-Max (Vsup) | 30V |
| Power Supplies | 6/30V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | SPI |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Half Bridge (4) |
| Current - Output | 1.6A |
| Logic Function | AND |
| Halogen Free | Halogen Free |
| Supply Current-Max (Isup) | 8mA |
| Voltage - Load | 6V~30V |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1 ~ 1/32 |
| Height Seated (Max) | 0.9mm |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AMIS30532C5321RG Overview
Drivers controllers is designed wDrivers controllersh a package of [0].This part is packed in a 32-VQFN Exposed Pad case.Ideally, the part should be mounted by Surface Mount.Drivers controllers is fDrivers controllersting for the component connected in General Purpose.There is a capability for the device to provide 4.5V~5.5V volts.With regard to operating temperature, it ranges -40°C~172°C TJ. A total of 32terminations are available in this part.A voltage of 6V~30Vcan be applied to the load.I would like to remind you that this amplifier should be operated at 12V.Surface Mountis the recommended mounting method.Ensure that the part output current remains at 1.6A.A STEPPER MOTOR CONTROLLERanalog IC is employed in this device.Drivers controllers is based on the AMIS-30532 part number.In this device, there are 32 pins.Drivers controllers is a part of the Motion Control Electronics series.Currently, there are 1 outputs available.Drivers controllers is maintained at 40V volts.
AMIS30532C5321RG Features
Applications : General Purpose
Load voltage across the chip 6V~30V
base on AMIS-30532 number
designed with 1 outputs
AMIS30532C5321RG Applications
There are a lot of ON Semiconductor AMIS30532C5321RG motor drivers applications.
- Camera-enabled smartphones
- Emergency lighting
- Step-up or step-down driver topologies
- Running preventive- maintenance diagnostics
- Brake lights
- Large outdoor LED display
- High power LED street light
- Commercial office
- Camcorders
- A cross between entertainment
