AMP01EX
| Parameters | |
|---|---|
| Pin Count | 18 |
| Number of Channels | 1 |
| Operating Supply Current | 4.8mA |
| Nominal Supply Current | 3.4mA |
| Slew Rate | 4.5V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 1nA |
| Voltage - Supply, Single/Dual (±) | ±4.5V~18V |
| Output Current per Channel | 120mA |
| Input Offset Voltage (Vos) | 100V |
| Bandwidth | 570 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 80dB |
| Voltage - Input Offset | 20μV |
| -3db Bandwidth | 0.57MHz |
| Voltage Gain-Nom | 10000 |
| Non-linearity-Max | 0.005% |
| Height Seated (Max) | 5.08mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-CDIP (0.300, 7.62mm) |
| Number of Pins | 18 |
| Operating Temperature | -25°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Resistance | 20GOhm |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | AMP01 |
AMP01EX Overview
There is a 18-CDIP (0.300, 7.62mm) case in which the instrumentation amplifier is packaged. Buffer amps of this type are called Instrumentation-types. Upon delivery, op amp ic is packaged in a Tube case. The number of terminations is approaching the 18 mark. A total of 18 pins are attached to buffer op amp. Please take in mind that op amp should be run at 15V. In total, the buffer amplifier consists of 18 pins. Regarding input offset voltage, op amp rates 100V. For this electrical component, Through Hole is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -25°C~85°C , which is a good operating temperature. An 4.8mA volt supply current is needed for this linear amplifier to operate. Voltage gain should remain at 80dB. As far as the device is concerned, buffer amplifier has 1 channels. It is important that the op amp resistance stays within the range of 20GOhm.
AMP01EX Features
18 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 20GOhm
AMP01EX Applications
There are a lot of Analog Devices Inc. AMP01EX Instrumentational OP Amps applications.
- Tablets
- Weighing systems
- Car stereo
- Power transmission
- Communication
- Active probe
- Large motor controllers
- Ultrasound transducers
- Vehicle electronics
- Computer workstations
