AMP02FPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Resistance | 16.5GOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | AMP02 |
| Pin Count | 8 |
| Operating Supply Voltage | 18V |
| Number of Channels | 1 |
| Operating Supply Current | 6mA |
| Nominal Supply Current | 5mA |
| Max Supply Current | 6mA |
| Slew Rate | 6V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 115 dB |
| Current - Input Bias | 4nA |
| Voltage - Supply, Single/Dual (±) | ±4.5V~18V |
| Output Current per Channel | 22mA |
| Input Offset Voltage (Vos) | 40μV |
| Bandwidth | 1.2MHz |
| Gain Bandwidth Product | 1.2MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.02μA |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Current - Output / Channel | 32mA |
| -3db Bandwidth | 1.2MHz |
| Dual Supply Voltage | 9V |
| Voltage Gain-Nom | 10 |
| Height | 4.57mm |
| Length | 9.27mm |
| Width | 7.24mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AMP02FPZ Overview
There is a 8-DIP (0.300, 7.62mm) case in which the instrumentation amplifier is packaged. The instrumentation amplifier in this picture is of the Instrumentation-type. A Tube case is used for delivering the op amp. The number of terminations approaches 8. The total number of pins on linear amplifier is 8. Please take in mind that this instrumentation amplifier should be run at 15V. A total of 8 pins are present on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 40μV. It is recommended that this electronic component be mounted using the Through Hole mounting type. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. A supply current of 6mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 80dB. There are 1 channels on the operational amplifiers. The operating supply voltage of instrumentation amplifier is rated 18V voltage. It is important to keep the resistance within the 16.5GOhm range of the linear amplifier.
AMP02FPZ Features
8 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 16.5GOhm
AMP02FPZ Applications
There are a lot of Analog Devices Inc. AMP02FPZ Instrumentational OP Amps applications.
- Digital cameras
- Test equipment
- Weak signal detection
- Broadcasting
- Information processing
- Power generator
- pH (acidity)
- Mobile phone
- Commercial audio systems
- Video amplifiers
