AN30888B-VB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN |
| Number of Pins | 16 |
| Supplier Device Package | 16-QFN (3x4) |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | DC DC Controller |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -25°C |
| Applications | Backlight, Lighting |
| Frequency | 1.5MHz |
| Base Part Number | AN30888 |
| Number of Outputs | 1 |
| Output Voltage | 5.2V |
| Max Supply Voltage | 15V |
| Power Dissipation | 100mW |
| Output Current | 1.6A |
| Max Supply Current | 10μA |
| Topology | Step-Down (Buck), Step-Up (Boost) |
| Min Input Voltage | 3V |
| Max Input Voltage | 15V |
| Internal Switch(s) | No |
| Dimming | PWM |
| Number of Segments | 4 |
| Switching Frequency | 1.5MHz |
| Voltage - Supply (Max) | 15V |
| Voltage - Supply (Min) | 3V |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
AN30888B-VB Overview
In order to save board space, the led driver uses the 16-VFQFN package. In LED drivers, the outputs are all set to 1.It is possible to mount the led driver using Surface Mount.When it emerges as a DC DC Controller, it performs extremely well and is highly reliable.The led light driver operates normally at -25°C~85°C TA. The benefits are considerable for Backlight, Lighting.A frequency of 1.5MHz is used to operate it.The base of this board is configured as 16 pins.Failures may occur if the voltage supply is below 3V.The number of segments is 4.It's mounted by Surface Mount.There is a base part number AN30888 for this LED driver.15V is an acceptable voltage.There is a maximum value of 15V supply voltage supported by this device. As its minimal input voltage, it operates at a voltage of 3V.There is 15V maximum value for supply current.If the maximum supply current is less than 10μA, the device is capable of providing high efficiency.Operating temperatures should not exceed 85°C in order to ensure stable operation.It is possible to supply the load with 1.6A current.Stable operation requires an operating temperature greater than -25°C.Having the switching frequency at 1.5MHz enables this electronic component to perform at its best.There is 5.2V voltage output from it.
AN30888B-VB Features
Available in the 16-VFQFN package
Operating temperature of -25°C~85°C TA
Frequency of 1.5MHz
Switching frequency of 1.5MHz
Output voltage of 5.2V
AN30888B-VB Applications
There are a lot of Panasonic Electronic Components AN30888B-VB LED Driver ICs applications.
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- White LED Backlight for portable equipment
- LED Lighting PFCs, Linear Dimmable
- General lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- LED Lightings for Inspection Devices
- Dimmable LED for vehicle interiors
- Sports Facility Lighting
- LED Lightings for Industrial Equipment
- Stage Lighting and Signage
