AN41908A-VB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-VFQFN |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | -20°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Resistance | 2.5Ohm |
| Applications | Camera |
| Max Power Dissipation | 141.4mW |
| Technology | Power MOSFET |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 3.1V |
| Terminal Pitch | 0.4mm |
| Base Part Number | AN41908A |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 5 |
| Max Output Current | 250mA |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | Serial |
| Nominal Supply Current | 10mA |
| Output Configuration | Half Bridge (10) |
| Current - Output | 250mA 150mA |
| Collector Emitter Voltage (VCEO) | 3.5V |
| Voltage - Load | 2.7V~5.5V |
| Motor Type | Stepper |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1 ~ 1/256 |
| Height | 900μm |
| Length | 6mm |
| Width | 6mm |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
AN41908A-VB Overview
The package is designed with [0].There is 44-VFQFN case included with the part.A mounting position of Surface Mountis recommended for the part.I believe it is suitable for the component connected to Camera.2.7V~5.5V volts can be supplied by the device.Drivers controllers operates wDrivers controllershin a range of -20°C~125°C TJdegrees Celsius.A motor of this type can be categorized as Brushed DC.In this part, there are 44 terminations available.If the voltage is applied to the load at the rate of [0], the load will be affected.Drivers controllers is very important to keep in mind that this amplifier should be operated at 3.1V.Maintain the current output of the part at 250mA 150mA volts.Using the AN41908Apart number, it is located.In this device, there are 44 pins.5outputs are available.0 indicates that the motor type is [0].The maximum output current reaches 250mAto meet the operating requirements.
AN41908A-VB Features
Applications : Camera
Load voltage across the chip 2.7V~5.5V
base on AN41908A number
designed with 5 outputs
Motor Type classified as Stepper
AN41908A-VB Applications
There are a lot of Panasonic Electronic Components AN41908A-VB motor drivers applications.
- Indicator
- Hazardous application
- Horticultural applications
- Monitoring the energy that the luminaire uses
- Digital still cameras
- Human-centric lighting
- Commercial office
- Step-up or step-down driver topologies
- Dash
- Smart lighting applications
