AN44066A-VF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-SSOP (0.240, 6.10mm Width) |
| Number of Pins | 32 |
| Supplier Device Package | 32-SSOP |
| Operating Temperature | -20°C~120°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2009 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | -20°C |
| Applications | General Purpose |
| Technology | Power MOSFET |
| Voltage - Supply | 10V~34V |
| Base Part Number | AN44066A |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 2 |
| Output Voltage | 37V |
| Interface | Parallel |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 8.2mA |
| Output Configuration | Half Bridge (4) |
| Power Dissipation | 427mW |
| Current - Output | 800mA |
| Logic Function | AND |
| Collector Emitter Voltage (VCEO) | 34V |
| Max Collector Current | 800mA |
| Voltage - Load | 10V~34V |
| Switching Frequency | 52kHz |
| Motor Type | Stepper |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2, 1/8, 1/16 |
| Height | 1.9mm |
| Length | 11mm |
| Width | 6.1mm |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
AN44066A-VF Overview
This package was designed with Cut Tape (CT)in mind.Drivers controllers is packaged wDrivers controllersh a 32-SSOP (0.240, 6.10mm Width) case.Ideally, the part should be mounted by Surface Mount.As a result, it is appropriate for the component connected to General Purpose.There is a capability for the device to provide 10V~34V volts.In terms of operating temperature, it falls within the range -20°C~120°C TJ.Voltage can be applied at a rate of 10V~34V volts to the load.Surface Mountis the recommended mounting method.Ensure that the part output current remains at 800mA.Using the AN44066Apart number, it is located.32 pins are provided for its design.Currently, there are 2 outputs available.At [0], the output voltage is maintained.The motor type can be recognized as Stepper.The maximal operating temperature reaches 70°C.Ideally, the operating temperature should be higher than -20°C.Using this device, maximum supply voltage of 5.5Vmay be applied to the device.A minimum supply voltage of 4.5Vcan be used for the operation of this device.
AN44066A-VF Features
Applications : General Purpose
Load voltage across the chip 10V~34V
base on AN44066A number
designed with 2 outputs
Motor Type classified as Stepper
AN44066A-VF Applications
There are a lot of Panasonic Electronic Components AN44066A-VF motor drivers applications.
- Hospitality buildings
- High brightness LED lighting
- drivers for outdoor application
- Running preventive- maintenance diagnostics
- RGB and monochromatic LED drivers for signage and traffic signals
- High brightness LED lighting
- Hidden coves in high-end residential settings
- Digital still cameras
- parking lights
- Industrial high-bay lights
