AN44067A-VF
| Parameters | |
|---|---|
| Applications | General Purpose |
| Technology | Power MOSFET |
| Voltage - Supply | 10V~34V |
| Base Part Number | AN44067A |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 2 |
| Output Voltage | 37V |
| Max Output Current | 2.5A |
| Interface | Parallel |
| Max Supply Voltage | 34V |
| Min Supply Voltage | 10V |
| Nominal Supply Current | 10mA |
| Output Configuration | Half Bridge (4) |
| Power Dissipation | 466mW |
| Current - Output | 2.5A |
| Logic Function | AND |
| Collector Emitter Voltage (VCEO) | 34V |
| Max Collector Current | 2.5A |
| Voltage - Load | 10V~34V |
| Motor Type | Stepper |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2, 1/8, 1/16, 1/32 |
| Height | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 34-TSOP (0.240, 6.10mm Width) Exposed Pad |
| Number of Pins | 34 |
| Supplier Device Package | 34-HSOP |
| Operating Temperature | -20°C~120°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2008 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | -20°C |
AN44067A-VF Overview
This package is designed to work with [0].The part is packaged in a 34-TSOP (0.240, 6.10mm Width) Exposed Pad case.Ideally, the part should be mounted by Surface Mount.Drivers controllers is fDrivers controllersting for the component connected in General Purpose.A device with a voltage range of 10V~34V volts is available.In terms of operating temperature, it falls within the range -20°C~120°C TJ.At a rate of [0], voltage can be applied to the load.The recommended way to mount it is Surface Mount.The output current should be kept at 2.5A for the part.As a result of the AN44067Apart number, it can be found.The device has 34 pins.There are 2 outputs available.37Vis maintained as the output voltage.Steppercan be recognized as a motor type.There is a maximum operating temperature of 70°C.There should be a temperature higher than -20°Cduring operation.The maximum output current reaches 2.5Ato meet the operating requirements.Using this device, maximum supply voltage of 34Vmay be applied to the device.A minimal supply voltage of 10V is sufficient to operate the device.
AN44067A-VF Features
Applications : General Purpose
Load voltage across the chip 10V~34V
base on AN44067A number
designed with 2 outputs
Motor Type classified as Stepper
AN44067A-VF Applications
There are a lot of Panasonic Electronic Components AN44067A-VF motor drivers applications.
- Alternative to HID lights
- Lighting for the ambience of tunability
- Landscape lighting
- Automotive exterior and interior lighting
- High brightness LED lighting
- Building technology
- Daytime running lights (DRLs)
- parking lights
- drivers for outdoor application
- High power LED street light
