AN44071A-VF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) Exposed Pad |
| Number of Pins | 56 |
| Supplier Device Package | 56-HSOP |
| Operating Temperature | -20°C~120°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2012 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 120°C |
| Min Operating Temperature | -20°C |
| Applications | General Purpose |
| Technology | Power MOSFET |
| Voltage - Supply | 10V~34V |
| Base Part Number | AN44071A |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 4 |
| Output Voltage | 37V |
| Max Output Current | 1.7A |
| Interface | Parallel, PWM |
| Max Supply Voltage | 34V |
| Min Supply Voltage | 10V |
| Nominal Supply Current | 19mA |
| Output Configuration | Half Bridge (8) |
| Power Dissipation | 448mW |
| Current - Output | 1A 1.7A |
| Logic Function | AND |
| Collector Emitter Voltage (VCEO) | 33.7V |
| Max Collector Current | 1.7A |
| Voltage - Load | 10V~34V |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2, 1/8, 1/16, 1/32 |
| Height | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
AN44071A-VF Overview
Drivers controllers is designed with Cut Tape (CT) package.Drivers controllers comes in a 56-TFSOP (0.240, 6.10mm Width) Exposed Pad case.In general, it is recommended that the part be mounted by Surface Mount.As a result, it is appropriate for the component connected to General Purpose.A device with a voltage range of 10V~34V volts is available.This device operates at a temperature range of -20°C~120°C TJ.A voltage of 10V~34Vcan be applied to the load.The recommended mounting method is Surface Mount.Set the part's output current to 1A 1.7A.The AN44071Apart number is used to locate the part.A device with 56pins is available.4outputs are available in total.In this case, the output voltage is kept at 37V volts.The maximum operating temperature reaches 120°C.Ideally, the operating temperature should be higher than -20°C.For the purposes of meeting its operation requirements, the maximum output current reaches [0].This device is capable of being applied with a maximum supply voltage of 34V.In addition, it can operate with the minimum voltage of 10V.
AN44071A-VF Features
Applications : General Purpose
Load voltage across the chip 10V~34V
base on AN44071A number
designed with 4 outputs
AN44071A-VF Applications
There are a lot of Panasonic Electronic Components AN44071A-VF motor drivers applications.
- Horticultural applications
- Dash
- Multiple output capability
- Emergency lighting
- Hidden coves in high-end residential settings
- Human-centric lighting
- Camera-enabled smartphones
- High power LED street light
- General lighting
- AM radio
