AN8014S-E1
| Parameters | |
|---|---|
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -30°C |
| Base Part Number | AN8014S |
| Function | Step-Up, Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 35V |
| Output Type | Transistor Driver |
| Output Configuration | Positive or Negative |
| Voltage - Supply (Vcc/Vdd) | 3.6V~34V |
| Output Power | 143mW |
| Control Features | Dead Time Control, Enable, Frequency Control |
| Topology | Buck, Boost |
| Frequency - Switching | 218kHz |
| Synchronous Rectifier | No |
| Max Duty Cycle | 52 % |
| Duty Cycle (Max) | 52% |
| Clock Sync | No |
| Output Phases | 1 |
| Number of Output Phases | 1 |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOP |
AN8014S-E1 Overview
As a result of 16-SOIC (0.173, 4.40mm Width) compact design, the switching controller is compatible with most applications. 1 outputs can be generated with the dc motor controller. Tape & Reel (TR) solid enclosure protects the pmic. A total of Transistor Driver dc switching's outputs can be handled by it. This dc control has a supply voltage and operating voltage of 3.6V~34V. Qualified to work in a -30°C~85°C TA dc switcher. In this switching controller, the switch can be set to 218kHz. dc dc regulators can be carried out with Surface Mount. Dead Time Control, Enable, Frequency Control is used for efficient switching control in the dcdc regulator. Other relevant dc to dc converter ics can be found by searching "AN8014S". There are 16 pins on switching converter. Based on the test statistics, DC regulator outputs voltage 35V. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 52 % during power-up and power-down. At least -30°C°C is recommended. A temperature of 85°C degrees Celsius is recommended. There is 16-SOP dc dc controller package associated with this part. There are 1 phases in this controller.
AN8014S-E1 Features
Transistor Driver Outputs
Switching Frequency: 218kHz
Dead Time Control, Enable, Frequency Control
Max Duty Cycle: 52 %
AN8014S-E1 Applications
There are a lot of Panasonic Electronic Components AN8014S-E1 DC to DC converter applications.
- Balance equipment
- Imported equipment
- Linear guide
- Computed tomography (CT)
- Serial communication converter
- Current source circuits
- Series voltage regulation circuits
- Planers
- Laboratories
- Driver circuits
