AN8018SA-E1
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-LSSOP (0.173, 4.40mm Width) |
| Supplier Device Package | 16-SSOP |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -30°C |
| Base Part Number | AN8018SA |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 15V |
| Output Type | Transistor Driver |
| Output Configuration | Positive or Negative |
| Output Current | 50mA |
| Voltage - Supply (Vcc/Vdd) | 1.8V~14V |
| Quiescent Current | 800nA |
| Output Power | 135mW |
| Control Features | Current Limit, Dead Time Control, Enable |
| Topology | Buck, Boost |
| Frequency - Switching | 20kHz~1MHz |
| Synchronous Rectifier | No |
| Max Duty Cycle | 80 % |
| Duty Cycle (Max) | 77%, 80% |
| Clock Sync | No |
| Output Phases | 1 |
| Number of Output Phases | 1 |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AN8018SA-E1 Overview
As a result of 16-LSSOP (0.173, 4.40mm Width) compact design, the switching controller is compatible with most applications. dc motor controller is suitable for 2 output generation. There is a Tape & Reel (TR) solid enclosure around the pmic. Transistor Driver dc switching's outputs (s) can be handled by it. Voltages 1.8V~14V are the dc control's supply voltage and operating voltage, respectively. Work well in dc switchers with a -30°C~85°C TA. This switching controller can switch at 20kHz~1MHz. It is suitable for general dc dc regulator when it is set to Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit, Dead Time Control, Enable. Searching "AN8018SA" will return other relevant dc to dc converter ics. Based on the test statistics, DC regulator outputs voltage 15V. If you are starting a new project, you should note the dc dc regulator's typical output current is 50mA. It is set to 80 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. A temperature -30°C lower than -30°C should be maintained. A temperature of 85°C more than 85°C degrees Celsius should be maintained in the undc regulator. During dormancy, the dc switching uses 800nA. Its supplier dc dc controller package is 16-SSOP. There are 1 phases in this controller.
AN8018SA-E1 Features
Transistor Driver Outputs
Switching Frequency: 20kHz~1MHz
Current Limit, Dead Time Control, Enable
Max Duty Cycle: 80 %
AN8018SA-E1 Applications
There are a lot of Panasonic Electronic Components AN8018SA-E1 DC to DC converter applications.
- Servo drive system
- Scientific testing
- PSRR circuits
- Precision electronic equipment
- Magnetohydrodynamic power
- Printing
- Smoke exhaust equipment
- Printing equipment
- Communication system
- Electric heating, lighting
