Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-6 |
Number of Pins |
2 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2011 |
Series |
EZBuck™ |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
Subcategory |
Switching Regulator or Controllers |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Terminal Pitch |
0.95mm |
JESD-30 Code |
R-PDSO-G6 |
Function |
Step-Down |
Number of Outputs |
1 |
Efficiency |
95 % |
Output Type |
Adjustable |
Voltage - Input (Min) |
3V |
Output Configuration |
Positive |
Current - Output |
1.2A |
Max Output Voltage |
26V |
Voltage - Output (Min/Fixed) |
0.8V |
Topology |
Buck |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
1.5MHz |
Synchronous Rectifier |
No |
Min Output Voltage |
800mV |
RoHS Status |
ROHS3 Compliant |
AOZ1280CI Overview
As a result of the use of the Tape & Reel (TR) package, the performance of this voltage regulator is optimized. In this voltage regulator, there are a total of 6 terminations. For space-saving purposes, this voltage regulator is available in the SOT-23-6 package. 1 outputs have been configured in the voltage regulator 12v. As you can see, this DC DC switching regulator generates Adjustable output on its output pins. The voltage regulator 12v fits the Surface Mount mounting hole. This voltage regulator 12v should operate at a temperature of -40°C~85°C TA when operating. A DC-DC switching regulator of this type operates at a switching frequency of 1.5MHz. A dc to dc voltage regulator's minimum input voltage of 3V is required for this voltage regulator to operate. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to 0.8V. It features maximum design flexibility due to dc to dc voltage regulator's 1.2A output current. There is a subcategory of this regulator voltage called Switching Regulator or Controllers. 2 pins are used for switching regulator operation. For this switching regulator, we recommend keeping the output voltage at at least 800mV volts. A maximum voltage of 26V can be obtained from the regulator voltage. A type of DC-DC switching regulator, belonging to the EZBuck? family of voltage regulators, is what we are describing here.
AOZ1280CI Features
1 outputs
2 pins
AOZ1280CI Applications
There are a lot of Alpha & Omega Semiconductor Inc. AOZ1280CI Voltage Regulators applications.
- Medical equipment
- Textile machinery
- Driver circuits
- Electrical power transmission
- Scientific testing
- Lathes
- Packaging
- Mobile phones
- Photovoltaic power
- Shearing machines