AOZ1361DI-02
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Supply Voltage-Max (Vsup) | 28V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 2.7A |
| Rds On (Typ) | 22m Ω |
| Built-in Protections | THERMAL |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
AOZ1361DI-02 Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).This file is included in package 10-WDFN Exposed Pad.This lighting drivere has a mounting type of Surface Mount.This switch is of type General Purpose.Keeping the temperature at -40°C~85°C TA ensures reliable operation.The lighting driver has a total of 1 outputs that are available for use.The LED driving board operates at Not Required volts.There is a maximum output voltage of P-Channel volts.This LED driving board is equipped with Slew Rate Controlled, Status Flag features in order for it to be useful.A total of 10 terminations have been recorded.The LED driving board has a total of 1 functions.Using a voltage of 12V allows for high efficiency.The LED driving board is equipped with a total of 10 pins.The maximum supply voltage for this LED driver is 28V (Vsup).Normal operation requires a voltage above 4.5V for the supply voltage.
AOZ1361DI-02 Features
Supplied from 12V
AOZ1361DI-02 Applications
There are a lot of Alpha & Omega Semiconductor Inc. AOZ1361DI-02 Power Switches ICs applications.
- USB3.1 Power Delivery
- USB Ports/Hubs
- USB Protection
- Portable GPS
- Low Voltage I/O System Power
- Handheld Devices
- PC Cards
- Solid State Drivers
- Various applications equipped with buttons
- Smart Phones, Feature Phones
