AP1212HSG-13
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 850.995985mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 110mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP1212 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 110m Ω |
| High Side Driver | YES |
| Turn Off Time | 10 μs |
| Height Seated (Max) | 1.75mm |
| Length | 5.05mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
AP1212HSG-13 Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).There is a 8-SOIC (0.154, 3.90mm Width) package that includes it.The lighting driver is mounted in the Surface Mount position.This switch is of type USB Switch.Ensure reliable operation by setting the temperature to -40°C~125°C TA.There is a default setting of 2 for output.It uses a supply voltage of Not Required to operate.A maximum output voltage of N-Channel volts can be achieved by this LED driver.There are Status Flag features available on the LED driving board.There is a AP1212 family of things that it belongs to.A total of 8 terminations can be found in it.In order to operate, the 8 pins are used.Currently, there are 2 functions associated with the lighting driver.To comply with the operation criteria, the maximum output current is reduced to 500mA.With a supply voltage of 5V, high efficiency is possible.Surface Mount is mounted in the way of this lighting driver.8 pins are connected to it in total.Currently, the LED driving board has 110mOhm resistance.
AP1212HSG-13 Features
Supplied from 5V
Resistance of 110mOhm
AP1212HSG-13 Applications
There are a lot of Diodes Incorporated AP1212HSG-13 Power Switches ICs applications.
- Smart Phones, Feature Phones
- Hot Swap
- Storage (HDDs, SSDs)
- PC Card Hot Swap
- Notebook PC
- Portable Music Players
- Low Voltage I/O System Power
- Solid-State Drives
- Notebook and Tablet Computers
- Wireless Modem Data Cards
