AP2004SG-13
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 142.994995mg |
| Operating Temperature | -20°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2004 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 25.5V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 27V |
| Input Voltage-Nom | 6V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 6mA |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 3.6V~27V |
| Control Features | Soft Start |
| Input Voltage (Min) | 3.6V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 10kHz~300kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 300kHz |
| Duty Cycle | 90 % |
| Length | 4.9mm |
| Width | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP2004SG-13 Overview
The switching controller fits in the 8-SOIC (0.154, 3.90mm Width) package and is ideal for most applications. It is sufficient to generate 1 outputs with this dc motor controller. The pmic is packaged in Tape & Reel (TR) solid enclosure. The system can process Transistor Driver dc switching's outputs (s). dc controls with 3.6V~27V voltage are supplied and operated. Suitable for a -20°C~125°C TJ dc switcher. This switching controller can switch at 10kHz~300kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Soft Start. SWITCHING CONTROLLER analog IC connects the switch converters. A switching converters's terminal (s) sits at the DUAL position. A variety of terminations with 8 of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 6V. You can find other relevant dc to dc converter ics by searching "AP2004". The switching converter has a total of 8 pins. In particular, switching converter belongs to the Switching Regulator or Controllers family. 3.6V should be the minimum input voltage for the dc dc voltage regulator. As determined by the test statistics, the output voltage of DC regulator is 25.5V. If you are starting a new project, you should note the dc dc regulator's typical output current is 200mA. DC switcher's Surface Mount qualifies it for most applications and prototypes. There is a maximum frequency of 300kHz for this dc regulators. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 27V. There is a nominal current supply of 6mA for this the controllers dc.
AP2004SG-13 Features
Transistor Driver Outputs
Switching Frequency: 10kHz~300kHz
Soft Start
PULSE WIDTH MODULATION
AP2004SG-13 Applications
There are a lot of Diodes Incorporated AP2004SG-13 DC to DC converter applications.
- Automatic plug-in machines
- Machining centers
- Drilling machines
- Surface processing equipment
- Sink circuits
- Driver circuits
- Special machining machine tools
- Refrigerators of central air conditioners
- Remotely powered electric motors
- Grinders
