AP2008SG-13
| Parameters | |
|---|---|
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2008 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 18.5V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 20V |
| Input Voltage-Nom | 6V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 6mA |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 3.6V~20V |
| Control Features | Soft Start |
| Input Voltage (Min) | 3.6V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 10kHz~300kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Length | 4.9mm |
| Width | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 142.994995mg |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
AP2008SG-13 Overview
In the 8-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. 1 outputs can be generated with the dc motor controller. An enclosure of Tape & Reel (TR) is used to package the PMIC. The program can handle Transistor Driver dc switching's outputs (s). dc controls with 3.6V~20V voltage are supplied and operated. A -20°C~85°C TA dc switcher is not a problem. The switching controller is capable of switching at the 10kHz~300kHz position. dc dc regulator is made easier with Surface Mount. In order to control switching efficiently, the dcdc regulator features Soft Start. An analog IC SWITCHING CONTROLLER is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. Various 8 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's input voltageis 6V volts. Search for "AP2008" to find other relevant dc to dc converter ics. In total, switching converter has 8 pins. The type is a particular Switching Regulator or Controllers of switching converter. The minimum input voltage of the dc dc voltage regulator should be 3.6V. According to the test statistics, DC regulator outputs 18.5V voltage. A starting point for a project is to note down the dc dc regulator's usual output current, which is 200mA. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. To run the voltage regulator dc to dc safely and reliably, users should apply 20V to the voltage regulator dc to dc. For this the controllers dc, the nominal current supply is 6mA.
AP2008SG-13 Features
Transistor Driver Outputs
Switching Frequency: 10kHz~300kHz
Soft Start
PULSE WIDTH MODULATION
AP2008SG-13 Applications
There are a lot of Diodes Incorporated AP2008SG-13 DC to DC converter applications.
- Thermal power
- Surge protection circuits
- Radio equipment
- Handheld GPS
- Mobile phones
- Surface processing equipment
- Series voltage regulation circuits
- Printing equipment
- Emergency lighting monitoring equipment
- Servo drive system
