AP2008SL-13
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 850.995985mg |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2008 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 18.5V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 20V |
| Input Voltage-Nom | 6V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 3.6V~20V |
| Control Features | Soft Start |
| Input Voltage (Min) | 3.6V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 10kHz~300kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Length | 4.9mm |
| Width | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
AP2008SL-13 Overview
In the 8-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. For outputs of 1, this dc motor controller is suitable. Tape & Reel (TR) solid enclosure protects the pmic. A total of Transistor Driver dc switching's outputs can be handled by it. This dc control operates at 3.6V~20V and has a 3.6V~20V supply voltage. Qualified to work in a -20°C~85°C TA dc switcher. Using this switching controller, it is possible to switch at 10kHz~300kHz. The Surface Mount allows it to be used for dc dc regulator in general. The dcdc regulator features Soft Start for efficient switching control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. An array of 8 terminations of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's input voltageis set to 6V. You can find other relevant dc to dc converter ics by searching "AP2008". Pins number 8 of switching converter in total. In particular, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator must be 3.6V. Based on the test statistics, DC regulator outputs voltage 18.5V. In most cases, the output current of the dc dc regulator will be 200mA, so note that when you start the project. This Surface Mount makes DC switcher suitable for most prototypes and applications. Users should apply 20V to operate the voltage regulator dc to dc safely and reliably.
AP2008SL-13 Features
Transistor Driver Outputs
Switching Frequency: 10kHz~300kHz
Soft Start
PULSE WIDTH MODULATION
AP2008SL-13 Applications
There are a lot of Diodes Incorporated AP2008SL-13 DC to DC converter applications.
- Mobile phones
- Experimental setup
- Boring machines
- Printing equipment
- Elevator lighting
- Gear/thread machining machines
- Product testing
- Combined machine tools
- Thermal power
- Packaging
